i1Display Failure? Or Windows 7 issue?

[bkkstudios]

<p>Hi,</p>

<p>I have an Eizo CG241W and i1Display 2. Since updating to Windows 7 64bit, despite 100 attempts I can no longer calibrate my monitor, even after trying suggestions from Eizo support.</p>

<p>I note the i1 s/w does not support Win7, but the Color Munki does. So I think either I have a broken i1 or this Win7 is the issue (or, more remotely, an Eizo issue). In both cases it leads to buying a new calibration device is kind of where I'm at.</p>

<p>Anyone experience this, and is Color Munki the best device in town?</p>

<p>Thx!</p>

[alan_chan4]

<p>I have been using i1d2 with w7 64bit w/o issue. Have you downloaded the latest version?</p>

[brad_smith8]

<p>I Googled around and it looks like no issues with <a href="http://www.xritephoto.com/ph_product_overview.aspx?ID=788&Action=Support&SoftwareID=768&catid=109">driver 2.40</a> and <a href="http://www.xrite.com/product_overview.aspx?ID=758&Action=support&SoftwareID=724">iMatch 3.6.2</a>.</p>

[wpahnelas]

<p>i use an i1 device w/a CE210W and win7/64. never had a problem from day 1. i use color navigator to calibrate, not the software that comes with the device, however....</p>

[custom film holders for fl]

<p>Like others, the version listed for Win7 has worked for me. Where I did have a problem was with the video drivers. If you don't have the latest version of those, try updating those too. I found I had to go into the drivers and turn off or reset a few options so that the drivers wouldn't conflict with the color management software.</p>

[x]

<p>I have Win7 64 bit with ATI graphics card and simply downloaded the latest X Rite software which works fine with my Eye-One Display. No problems. Pretty good compatibility for a 7-year old Eye-One</p>

[bkkstudios]

<p>Thx guys. The latest i1 driver is v2.40 from 2006! </p>

<p>I guess it must be some interaction with something else, or maybe my i1 is dead. Very frustrating to be sure.</p>