carl_sanders_photography Posted December 18, 2009 Share Posted December 18, 2009 <p>Hi there, we are purchasing a used one on the basis that someone along the way informed that these can be cut down in height, the purchase is less than a 2 series Gitzo tripod. Has anyone done this or know of anyone who has? Was it relatively easy to do, it is appreciated that no likes doing this but it will not fit in the studio otherwise.<br>Any advice much sort after and appreciated.<br>best wishes, <br>Carl </p> Link to comment Share on other sites More sharing options...
john_a5 Posted December 18, 2009 Share Posted December 18, 2009 <p>Depends on how it is built, but many of the studio stands work on the basis of a counter weight (inside the column) that is on the end of a long cable that attaches to the cross arm. This works with a "cap" that has a pulley and sits on top of the column. By cutting the column length and shortening the cable and then putting the "cap" back on the column, you should be done with it.</p> <p>Might want to pay for a machine shop to make the cut so it is precise and squared off!</p> Link to comment Share on other sites More sharing options...
tim_ludwig2 Posted December 18, 2009 Share Posted December 18, 2009 <p>Yes, It can be done as John describes. But unless your ceiling is so low that you must do it, I suggest that you don't. Even if you only use that extra height once in a blue moon, you may be surprised at how often that blue moon shows up.</p> <p>I recently bought a new longer column for my studio stand and while most of my work is done at much lower levels, that nine foot possibility is getting a work out.</p> Link to comment Share on other sites More sharing options...
john_a5 Posted December 19, 2009 Share Posted December 19, 2009 <p>I agree with Tim. I bought the 10 footer 20 years ago and I can tell you that I have stood up there-you'd be surprised how much warmer it is up there!-many times to get the right shot. There just isn't a better support for such work.</p> Link to comment Share on other sites More sharing options...
carl_sanders_photography Posted January 31, 2010 Author Share Posted January 31, 2010 <p>Thanks we used a Bahco hacksaw, 145kg tension with 24tpi (standard purchase), no expert but it gave clean cut, moved tube round instead of cutting across, finished with metal file and sandpaper. The whole item was striped, cleaned, refurbished and looks like new. Whole stand is simply engineered so pleasure to progress. Any one else thinking of doing this only too happy to help, best wishes, </p> Link to comment Share on other sites More sharing options...
carl_sanders_photography Posted January 31, 2010 Author Share Posted January 31, 2010 <p>Ooops! sent in error!</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now