bal_zs_bir_ Posted November 29, 2009 Share Posted November 29, 2009 <p>Hello,<br> I bought a bx 500 ri kit, it was ok until yesterday. I'm not sure if something faulty inside of the lamp, but one of the head simply just not firing the flash unit. It charges, no error message, the green lights next to the buttons are on, so it looks like everything is normal. The flash tube is not broken, because I changed it with the other head from the kit and it was working just fine in the other head. I thought this is some kind of configuration issue, but I tried to find what is that I changed. Nothing.....btw, the modelling lamp is also working just fine....<br> please help out with some idea, and yes I know, I should go to a repair shop, but I'd hope that only my mistake causing this issue...</p> Link to comment Share on other sites More sharing options...
ian_rose Posted November 29, 2009 Share Posted November 29, 2009 <p>Hi Balazs<br> Test<br> 1. Does it fire on the test button?<br> 2. Does it fire when hard wired to the camera's pc port ?<br> 3.Check the sync switch on the back of the light ?<br> If 1. works but nothing else check connection from camera.<br> If 1. and 2. work check your triggering of the flash.<br> For any more troubleshooting we would need more information on how the lights are set to trigger<br> Ian R</p> Link to comment Share on other sites More sharing options...
bal_zs_bir_ Posted November 29, 2009 Author Share Posted November 29, 2009 <p>Hi,<br /> on the lamp, the test button doing nothing, it means no flash, but it starts to recharge and beep comes when it's ready, wierd...<br /> I also tried the wireless trigger which comes with the kit, the same, no flash, but recharge, beep when ready<br /> with wired to camera I did not tried it so I will first thing in the morning (I have a job someehere, typical when you have a job to do, suddenly happening something like that)</p> <p>again, no error code, the green led next to the test flash working just fine....</p> Link to comment Share on other sites More sharing options...
devon_mccarroll Posted November 29, 2009 Share Posted November 29, 2009 <p>Make sure the flashtube is seated correctly. I've read quite a few posts here and on other boards where the flashtube either wasn't seated quite right, or came loose. May or may not be the answer, but sometimes it's the simple things!</p> Link to comment Share on other sites More sharing options...
bal_zs_bir_ Posted November 30, 2009 Author Share Posted November 30, 2009 <p>the tube is seated correctly</p> Link to comment Share on other sites More sharing options...
bal_zs_bir_ Posted December 5, 2009 Author Share Posted December 5, 2009 <p>well, sometimes the modelling lamp just suddenly switch off....some kind of electronical issue....I don't know, I'm trying to get contact with Robert White shop, but I couldn't get any answer yet, I bought it there, and I used three times. If this is an electronical issue I'll be really disappointed in Elinchrom.....</p> Link to comment Share on other sites More sharing options...
david_ng2 Posted December 7, 2009 Share Posted December 7, 2009 <p>I have exactly the same problem with one of the lights in the bxri 500/500 kit also. Thought it was the problem with the trigger at first, but noticed the test fire button on the unit itself won't trigger the light either. <br /> Brought it back to the shop and the lighting specialist accepted that it is a problem with the unit and sent it for repair / replacement under warranty. Will update this when I have an update. The shop was really nice to lend me a unit until mine is fixed. I sure hope this doesn't spell problem with Elinchrom's recent products or quality control.</p> Link to comment Share on other sites More sharing options...
bal_zs_bir_ Posted December 8, 2009 Author Share Posted December 8, 2009 <p>Thank you David, I already let them know about this, but unfortunately I didn't get any reply back, I'm going to send another mail to them....I'm in the middle of Europe, the shop is in UK</p> Link to comment Share on other sites More sharing options...
bal_zs_bir_ Posted December 17, 2009 Author Share Posted December 17, 2009 <p>the shop finally replied, it was a small glitch in the mail system, anyway, they are now looking into it, they r very helpful</p> Link to comment Share on other sites More sharing options...
bal_zs_bir_ Posted May 3, 2010 Author Share Posted May 3, 2010 <p>the probelm solved couple of weeks ago, the lamp has an electronic problem, the manufacturer repaired and changed everything, thanks to RobertWhite Photographic assistance</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now