chris_kargotis1 Posted August 23, 2001 Share Posted August 23, 2001 Anyone know where I can get a pressure foot switch for inspection development? Link to comment Share on other sites More sharing options...
michael_a._smith1 Posted August 23, 2001 Share Posted August 23, 2001 They should be available in any good hardware store. <p> Michael A. Smith Link to comment Share on other sites More sharing options...
marv5 Posted August 23, 2001 Share Posted August 23, 2001 The ones that I got for my Zone VI timer are made by Treadlite. Cat. No. T-51-S, Linemaster Switch Corp, Woodstock Conn. I also have one that has no name on it but it looks exactly like the others. It was designed for running a piece of equipment such as a band saw, I use it to turn on my light box. You may find them with a "funky" plug to fit a particular piece of equipment; that is easily dispatched with a side cutter. As Michael said a well stocked hardware store is your best bet. Link to comment Share on other sites More sharing options...
brian_ellis3 Posted August 24, 2001 Share Posted August 24, 2001 Maybe I'm missing something here but I'll take a chance and maybe just reveal my ignorance. While foot switches of various sorts are readily available, if you're going to develop by inspection it isn't enough just to find a foot switch, you also have to find a safelight into with which the foot switch can be plugged. Since safelights generally aren't meant to be operated by foot switches (I don't think), that seemed to be an impossible task when I was looking a year or so ago. Am I missing something here - is there some way to just take any old foot switch and make it work with any old safelight? Link to comment Share on other sites More sharing options...
sean_yates2 Posted August 24, 2001 Share Posted August 24, 2001 FWIW, <p> I have my safelight plugged into one of the old Time-O-Lite enlarger/safelight timers which has a 4 pin flat bladed port for a foot switch. I think the type of connector used to be called a Wollensak after the many a.v. devices that company made that used that type of connection. But that could be wrong. <p> In the U.S. if you look around - old photo stores, garage sales, the classifieds in the local paper, etc. you may find what you need. But in The United Kingdom, I can't say what avenue to approach. You could try B&H though - I'm not connected with them in anyway, but a short search of their website produced the following options: <p> http://www03.bhphotovideo.com/default.sph/FrameWork.class?FNC=ProductActivator__Aproductlist_html___26180___KEFS___REG___CatID=749___SID=E8BF4C39FA0 <p> <p> http://www03.bhphotovideo.com/default.sph/FrameWork.class?FNC=ProductActivator__Aproductlist_html___130090___TIFS___REG___CatID=749___SID=E8BF4C39FA0 Link to comment Share on other sites More sharing options...
sean_yates2 Posted August 24, 2001 Share Posted August 24, 2001 Now that I re-read this, I see that all Chris needs is a way to interupt the circuit between the bulb and the outlet - a simple spring loaded switch that can be operated with the foot can be contrived via a trip to a hardware store, as Michael suggests, or a Radio Shack, I should think. Link to comment Share on other sites More sharing options...
chris_kargotis1 Posted August 25, 2001 Author Share Posted August 25, 2001 Thankyou for your reply Sean and Michael. The thing is it's difficult to find anything that's any good in the UK these's days the place is falling apart. Link to comment Share on other sites More sharing options...
dave_schneider Posted August 25, 2001 Share Posted August 25, 2001 I made a very inexpensive foot switch for my Gralab 451 with a doorbell switch and a headphone cord. I mounted the doorbell switch on a wood 1x4 about 8 inches long. I can rest my foot on the board and hit the switch with the ball of my foot. The Gralab uses a TTL input for the foot switch. DO NOT try running 120 VAC through this type of a switch. If you must run 120 VAC through a floor switch either by the industrual grade floor switch or make an enclosure to house a microswitch. The risk of water getting onto the floor switch running 120 VAC concerns me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now