Ilex #4 shutter size?

[cyr_smith]

Anybody know for sure what size hole is needed for a Ilex Acme #4 shutter? I need it in millimeters is possible. Thanks.<div></div>

[sw12dz]

I would contact S.K. Grimes (www.skgrimes.com) and receive the correct answer.

[michael_briggs2]

Do you have the flange or retaining ring? Usually the retaining ring or flange has a projection that sticks

through the hole -- this sets the hole diameter, not the threads on the shutter. If you have the flange or

retaining ring, why don't you measure it? -- that way you will be sure to have the right diameter. If you are

having someone make the hole for you, you could give them the part. There may have been some variations in Ilex

shutter dimensions over the years.

[dave_s]

FWIW, the <A HREF="http://www.skgrimes.com/ilex/index.htm">hole size is listed </a>on the Grimes site: 2.604 inches is 66.1mm. Like Michael says, I can't swear that they never varied in size, so use this to cross-check your actual measurement.

[cdewen]

Cyr:

 

I have the exact same lens/shutter combo. My flange fits very snugly into a hole 65.5mm in diameter (metal lensboard).

 

Regards,

Charley

[cyr_smith]

Hey-! Thanks Charley, I appreciate the info. PS do you like the lens??

[cyr_smith]

Hey to Dave also, sorry just realized you had answer the question also. Thanks.

[cdewen]

Cyr:

 

Never used it. I got it in a package deal - Ilex #3, 4 & 5 shutters, all with Caltars mounted in them. I bought the group just to mount other lenses in the shutters. I've have shot the 14 3/4" (375mm) a couple of times, though, and from that suspect the Caltars are underrated and good bargains.

 

Charley