Jump to content

90mm f/8 Schneider SA lens with Wista VX


david b

Recommended Posts

I have recently bought a used Wista VX and a Schneider super angulon 90mm f/8 lens. I have not had the opportunity to try it yet, and will not for a couple of weeks at least, so perhaps people will tolerate these questions in advance of me trying to see for myself.

 

<p>

 

1. Will the 90mm lens show any of the camera bed if the bed is not dropped and the lens focussed on infinity? I tried looking this up in the archives, but could not specically find this camera/lens combination. It would be a bit of a pain I imagine to have to drop the bed and raise /tilt the front standard. I assume though that for vertical compositions, dropping the bed would definately be necessary?

 

<p>

 

2. Has anyone used the HiTech 100 filter system standard 67mm mounting ring with this lens? Does this cause vignetting?

 

<p>

 

Thanks! David.

Link to comment
Share on other sites

Save yourself headaches and buy the wideangle ring first. Better

yet, and a more cost effective option, would be to buy the Lee hood

with two filter slots & a 67mm wide angle ring, then put HiTech

filters into the Lee's slots. The standard Lee hood will not

vignette when properly sized for this lens, & I use the HiTech

filters occassionally with my Lee setup and they don't fall thru-

despite being 0.5mm thinner.

Link to comment
Share on other sites

  • 2 weeks later...

I hope this is not unrelated. I have a 75mm Super Angulon which is

definitely too wide for my MPP Mk VII. (It's OK for landscape but

includes a lot of the bed on portrait format). Does anyone know

(without my making an expensive mistake) if the 90mm Super Angulon

works on the MPP in both aspects?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...