emile_de_leon9 Posted October 13, 2001 Share Posted October 13, 2001 Hi...does anyone know of a not too expensive uv contact print light (8x10) for platinum/palladium prints? Been thinking of doing this for years...finally ready to take the jump! Thanks, Emile Link to comment Share on other sites More sharing options...
david richhart Posted October 14, 2001 Share Posted October 14, 2001 Emile... platinum printing requires a very intense light. If you are just beginning in the process I think you would do well to look at the website at www.platinumphotographer.com/plat.html <p> Best wishes -Dave Link to comment Share on other sites More sharing options...
joe_lipka2 Posted October 14, 2001 Share Posted October 14, 2001 Edwards Engineering has a manufactured model you can purchase. Ditto for the Palladio Company. Instructions for do it yourself light sources are fairly easy to come by. (Don't have my sources for this type of plan, but I bet some other posters will jump in with the correct information.) So, if you are handy with tools, then you could build your own. Just make sure you get the proper UV light bulbs. <p> Good luck with the platinum printing, and if you have any other questions, you can post on the alternative process forum at photo.net. Link to comment Share on other sites More sharing options...
aaron2 Posted October 15, 2001 Share Posted October 15, 2001 I was told someone uses a facial tanning unit quite successfully. I've not tried it though. <p> Aaron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now