keith_baker1 Posted September 14, 2001 Share Posted September 14, 2001 Greetings,I have an ancient calumet 4x5 view camera. I recently bought a recessed lens board for my 90mm 6.8 rodenstock lens. Problem is.....I can't get the cable release to also fit into the recess. I have a clever litte angled (bent) cable release adaptor but it too won't fit. I have tried a number of different releases and none will fit. Does anyone have a solution?Thanks Link to comment Share on other sites More sharing options...
bob_salomon Posted September 14, 2001 Share Posted September 14, 2001 The Gepe Pro Wide Angle Cable Release Adapter was made to solve just this problem. Available from camera stores. Link to comment Share on other sites More sharing options...
jnorman1 Posted September 14, 2001 Share Posted September 14, 2001 bob - i went to your website looking for the item, since i have never been fully satisfied with the short metal flex adapters i have used for years (the metal sheathing tends to fray easily), but while i saw the gepe pro wide angle gizzie listed, it did not provide a picture or description. a couple of years ago, i tried one of the adapters that is rigid and has a swivel right angle, and uses internal springs and little ball bearings - that one failed on me the day i got it. can you provide a description of the adapter or a picture? thanks. Link to comment Share on other sites More sharing options...
charlie_strack Posted September 14, 2001 Share Posted September 14, 2001 I've got a 90mm lens I used on my old Calumet 4x5 (no longer with me) with a recessed lensboard in the past. I found a short (6 inches, maybe), very flexible cloth covered cable release (really cheap!) that I left on the lens permanently and could wrap around the lens. <p> I couldn't find a better option at the time. Link to comment Share on other sites More sharing options...
peter brown - www.peterbro Posted September 14, 2001 Share Posted September 14, 2001 Hi Keith, <p> I saw this on eBay large format pages today <p> EUROPEAN 45º Rotating L-Cable Release Adapter Item # 1274431291 <p> It may be what you're looking for. <p> Kind regards <p> Peter Brown Link to comment Share on other sites More sharing options...
audidudi Posted September 14, 2001 Share Posted September 14, 2001 Toyo makes (made?) some really nice extenders ... not cheap, though. Link to comment Share on other sites More sharing options...
andrea_milano Posted September 15, 2001 Share Posted September 15, 2001 maybe you could adapt the beautiful Linhof solution to your board, this "paperclip" and its holder maneges to reach and be adapted to most lenses or better said shutters releases. This is not the only recessed lens board (maybe the best, I hear Bob think) if you need another one look around. Good luck! Link to comment Share on other sites More sharing options...
bob_salomon Posted September 15, 2001 Share Posted September 15, 2001 Gepe Pro is a vert shory PVC cable release extension with a very small tip so it can make very tight bends Link to comment Share on other sites More sharing options...
stuart_whatling1 Posted September 15, 2001 Share Posted September 15, 2001 The Wista VX recessed lens board uses a similar "paperclip" gizmo to the Linhof but is probably cheaper. It's possible you might be able to adapt one of these onto a Calumet plate. I use one with a Fujinon 65mm lens on the VX and can confirm that once you've got the shutter in the right place, it works a treat (though setting the aperture is still a pain). Link to comment Share on other sites More sharing options...
bob_salomon Posted September 15, 2001 Share Posted September 15, 2001 Gepe-Pro is on our website under "Latest News" www.hpmarketingcorp.com. <p> There is nothing to show as a picture. It is simply 3.25" long flexible PVC cable release material ith a small tip for the shutter and a threaded socket to accept the cable release. <p> This was mde to allow the 35mm Apo Grandagon to be fired when mounted into the double recessed lensboard for the Technikardan. It is the only device able to do this. <p> As we inport Linhof as well as Wista and L and U cable release devices we know that this item is the ONLY type that will properly do what you want. Link to comment Share on other sites More sharing options...
keith_baker1 Posted September 15, 2001 Author Share Posted September 15, 2001 As usual, the group has been very generous and quite helpful -- Thanks to all of you who contributed to the answer. Keith Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now