bert_lippel2 Posted May 26, 2008 Share Posted May 26, 2008 They claim a 5 minute installation and impressive savings for the Epson 2400printer.Can someone confirm this? Bert Link to comment Share on other sites More sharing options...
pje Posted May 26, 2008 Share Posted May 26, 2008 Bert, I have two these; one on a 2200 and the other on a 2400. I quite like the Niagara system as the ink tubes are attached and feed from the bottom of the containers. Previously I had an Ink Republic system which was just bottles with the tubes stuck through holes in the caps. I had loads of problems with the IR system and finally trashed it and bought the Niagara system. The setup is quick and relatively simple. The main thing is to get all the air out of the lines and cartridges. They provide a little vacuum bottle to suck the in into the cartridges and extract the air. I use the Niagara system on the 2200 with Jon Cone's Piezography K7 Neutral black ink set for B&W printing. The 2400 uses the MediaStreet ink. Good Luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now