john_otway Posted April 11, 2008 Share Posted April 11, 2008 My SWC ( with synchro-compur lens )is misbehaving. It's been in storage for two years, and in trying it out yesterday the following is happening: 1)Shutter and aperture rings are very stiff when uncoupled. 2)Shutter speed appears to work well from 1/500 down through 1/60, but 1/15 opens for about 1 1/2 seconds...1 second stays open for anything between 21 seconds to 57 seconds. I need to use it next week. Will working the aperture/shutter rings independently for a prolonged period loosen it up, or will it do more harm than good; similarily the shutter speeds? I need depth of field, so can't confine the speeds to 1/30 and higher. Link to comment Share on other sites More sharing options...
ebokeh Posted April 11, 2008 Share Posted April 11, 2008 i believe that at 1/15 (and slower) the shutter uses a different timing mechanism and it sounds as if that spring/mechanism is gummed up (technical term). Others may be able to shed more light on it. I'd say you're probably fine to exercise it but it may not get you anywhere. regardless it sounds like it needs a little CLA (or maybe a little more). I don't think that 'working the shutter and aperture rings' will do anything to fix this as it sounds like the lubrication simply dried up.. -john ebokeh.com Link to comment Share on other sites More sharing options...
john_otway Posted April 12, 2008 Author Share Posted April 12, 2008 Many thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now