kader_nazef Posted November 12, 2007 Share Posted November 12, 2007 Need some help on finding the right lens plate to mount on the Arca-Swiss Quick release w/Arca-Swiss Ballhead B1. Any one using this lens on this type of support? Thank you for your time. Link to comment Share on other sites More sharing options...
steve_kennedy3 Posted November 12, 2007 Share Posted November 12, 2007 Wimberley has some nice plates, none more than $58. Go to www.tripodhead.com Link to comment Share on other sites More sharing options...
kader_nazef Posted November 12, 2007 Author Share Posted November 12, 2007 Thanks Steve for answering my question. Here is the result of my search today ============================================= Wimberly P-30($55.00) 4.43" long, 2 screws P-40 ($58.00) 5.88" long, 3 screws P-50 ($58.00) 6.58" long, 3 screws ============================================= REALLY RIGHT STUFF (2 categories) Telephoto Lens Mounts : MRP-1 for Canon EF 500mm/f4.5L (not "IS") ($65.00) dimensions: 6" x 1.5" x .370" (152.4mm x 38.0mm x 9.3mm) 2. screws Multi-Purpose Rails & Accessories : MRP-113 dimensions: 113mm x 38mm x 9.3mm (4.45" long) ($55.00) MRP-73 dimensions: 73mm x 38mm x 9.3mm (2.87" long) ($55.00) ================================================================== KIRK ENTRPRISES Kirk Quick Release Lens Plates for Canon Manual Focus Lenses with Tripod Collars LP-6 but no tech. info (dimensions), just a picture showing 2 screws. ($55.00). Looking at the picture it seems to be 6" to 7" long ==================================================================== Here is my dilemna. Which one to pick? My Canon FD 500mm F4.5L lens has a tripod collar which base is 2.5" long. My question is: Should the plate be longer than 2.5". Is longer better? Called today Wimberley and Really Right Stuff. They couldn't tell me exactely which one I need for my lens. I couldn't get in hold with Kirk. Link to comment Share on other sites More sharing options...
feanolas1 Posted November 15, 2007 Share Posted November 15, 2007 You need a plate that will align with both screws on the 500's tripod mount (you cannot rely on only one screw). The length of the plate in itself is not particularly important. A little bit more may help to balance the lens on the tripod; however, I made mine to the exact length of the mount and it allows for enough adjustement to balance it whether with the hood, with the T90 or with the F1N. Link to comment Share on other sites More sharing options...
kader_nazef Posted November 16, 2007 Author Share Posted November 16, 2007 Thank you Jean-Bernard. I just ordered the MPR-1 from Really Right Stuff. It is 6" long (15.2 centimeters), so, as you said, I'll have enough room to balance the lens. You are right, the lens need to be tightened with two screws. Here are the charateristics of this plate: MPR-1 dimensions: 6" x 1.5" x .370" (152.4mm x 38.0mm x 9.3mm) (excluding flange), Weight: 4.0 oz (114g) Includes: Rail, moveable flange, 2 B101 screws, 4 M3x8mm screws and 2 hex key wrenches (purchase reducer bushing if adding a clamp) Standard Really Right Stuff. Warranty 5-year Cost $65.00 Wimberley have a similar plate P-40 for $58.00 (5.88") Kirk have the LP-6 for $55.00 (6") I prefred the Really Right Stuff's plate as it is designed specifically for the Canon EF 500mm F4.5Llens which is the same lens as the FD I have (just EOS). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now