How To Open a Fujichange Film Cartridge

[kent_phelan]

Pardon me for being a klutz, but I cannot see how to do this. I just acquired a Quickchange holder and a cartridge of Provia from Jeff Taugner at Badger. I've played with it for a couple of hours, "shot" all the film, and am now trying to open the spent film cartridge. I'd like to reload this thing with HP5+. I read Stuart Whatling's informative post: <a href="http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl?msg_id=006LET">here</a>, but still cannot get the cassette open. I've reset the film counter to 1, but for some reason I cannot see how to unlock it.

 

<p>

 

Does anybody know where there might be a photo of just where to press to unlock this cartridge?

 

<p>

 

Thanks much,

[sai_kit_ng]

Hi, you can e-mail Matt of Robertwhite.co (matt@robertwhite.co.uk) for

some photos instructions. They are of great help.

 

<p>

 

Kit

[john_hennessy1]

My method is to hold the cart in my right hand with end that opens

(opposite the counter) pointing to the left with the dark slide facing

up (film label down). Then with my first and fourth fingers of my left

hand, I push down on the two tiny sliding catches on the end while

push off the end with a right finger or two. The sliding buttons move

very little but the end cap will just pop right off. Then pull the

dark slide carefully and the film septums (septi?) will spring up.

[kent_phelan]

Thanks John! That did it.

[thilo_schmid]

Kent,

 

<p>

 

another easy way to open the cartridge is to first reset the counter

and then to reopen the darkslide in the holder. When the darkslide is

(partly) open, simply open the holder and remove the now open

cartridge.

 

<p>

 

Regards,