nilangsu mahanty Posted November 2, 2007 Share Posted November 2, 2007 Today I've upgraded the version of DPP that'd come with my EOS 350D two years back. The latest version, I think, is 3.2.0. But the lens correction tool in the tools palette appears to be inactive. Does anybody have any idea why? Why should it be body-specific? It should apply to all CR2 files, shouldn't it? Thanks in advance for any help/ideas. Regards, Nilangsu Link to comment Share on other sites More sharing options...
bill_akstens Posted November 2, 2007 Share Posted November 2, 2007 Only certain cameras and certain lenses are supported. If its greyed out it's not supported for you. Other recent threads can point you to the official list of what's supported. Link to comment Share on other sites More sharing options...
nilangsu mahanty Posted November 2, 2007 Author Share Posted November 2, 2007 It is, as you say Bill, greyed out. I use the Sigma UWA lens with the 350D body and need to correct distortion. Hard luck, I guess. Thanks, Nilangsu Link to comment Share on other sites More sharing options...
nilangsu mahanty Posted November 2, 2007 Author Share Posted November 2, 2007 Apparently it supports all Canon digital bodies. Please see the attached screenshot (cropped to minimize size). -Nilangsu<div></div> Link to comment Share on other sites More sharing options...
bobatkins Posted November 2, 2007 Share Posted November 2, 2007 There are limitations on body and lens combinations. I don't think the 350D is supported (but the 400D is). For a full list of what's compatible and what's not see http://www.bobatkins.com/photography/digital/canon_dpp_32.html My biggest complaint is that the EF-S 17-85IS isn't supported (yet?), and it really needs help at 17mm. They support the 5 different versions of the 18-55 kit lens, so they're obviously not just supporting pro level lenses! Obviously they are not ever going to offer support for Sigma or other 3rd party lenses. Let's just hope they add the rest of the Canon lenses in the next update. Link to comment Share on other sites More sharing options...
wes_baker1 Posted November 2, 2007 Share Posted November 2, 2007 PTlens does a great job at lens correction, and supports far more camera/lens combos than DPP ever will. It's not very expensive either. Comes in both standalone and Photoshop plug-in versions. I recommend it highly. Link to comment Share on other sites More sharing options...
bobatkins Posted November 2, 2007 Share Posted November 2, 2007 DxO does too. However DPP also does the RAW conversion (which I don't think PTlens does) and it's free (which DxO isn't). It's all a matter of workflow. If you can do it all in one program it just makes life easier. Link to comment Share on other sites More sharing options...
mark u Posted November 2, 2007 Share Posted November 2, 2007 You can use PTLens to fix problems with combinations not supported by DPP. It's shareware/freeware plus donation, and is available both as a Photoshop plugin and stand alone application: http://epaperpress.com/ptlens/ Many lenses are automatically covered (including the Canon 17-85 and many popular third party lenses), and you can apply to have an unlisted lens added to the automated list by sending in test images. Moreover, you can tweak the results yourself anyway. As a side benefit, your digicam may also be covered already if you have one. For rather more money, DXO Optics Pro provides slightly more sophisticated adjustments (it works better for closer subjects than does PTLens), albeit that the range of lenses covered is slightly more limited than PT Lens. http://www.dxo.com/intl/photo Link to comment Share on other sites More sharing options...
steve santikarn Posted November 2, 2007 Share Posted November 2, 2007 it doesn't support the combination of the 40D and the 70-200 f4 IS either. But I guess the wide angle lenses are in more need for the corrections than the tele. Link to comment Share on other sites More sharing options...
nilangsu mahanty Posted November 3, 2007 Author Share Posted November 3, 2007 Yes, Sitthivet, the wide-angle lenses need more correction, in fact, a lot more correction. Thank you so much, Bob, for the link to your site, and Mark, for the link to an immensely impressive software. I am stunned to see what PTlens achieves. I wonder what the trade-off is. Thank you, Wes, for your response. Regards, Nilangsu Link to comment Share on other sites More sharing options...
PuppyDigs Posted November 3, 2007 Share Posted November 3, 2007 I tried most of my Canon lenses (10) and only the EF 24-105 L was supported. So apparently it's a short list. I wanted to try the vignette feature but I couldn't find any wide shots at F4. I seem to always stop down for more DOF when shooting sweeping landscapes. However the EF-S 17-55 is the one that really needs corrections due to frequent purple fringing, and it ain't supported. I suspect Canon will slowly add lens profiles to DPP with subsequent updates. Nevertheless, DPP 3.2 is an excellent program made better. And it's free. Sometimes the light’s all shining on me. Other times I can barely see. - Robert Hunter Link to comment Share on other sites More sharing options...
robin_sibson1 Posted November 3, 2007 Share Posted November 3, 2007 Peter, the documentation for DPP 3.2 lists the EF-S 17~55/2.8IS as supported. The omission many people have drawn attention to is the EF-S 17~85, which is sorely in need of the help that DPP 3.2 could give - perhaps that is what you meant. Link to comment Share on other sites More sharing options...
steve_dunn2 Posted November 5, 2007 Share Posted November 5, 2007 <cite>I am stunned to see what PTlens achieves. I wonder what the trade-off is.</cite> <p>Nothing that I've found yet. I've been using various versions of PTLens for a couple of years now and I think it's fantastic. I can fix curvilinear distortion (automagically), <abbr title="chromatic aberration">CA</abbr>, perspective distortion, and my laziness in not getting the horizon horizontal, all in one program, all at a full 16-bit depth*. PTLens will run in multiple threads, too, to speed things up on hardware which supports this (multi-CPU, multi-core, or hyperthreaded systems). I don't have vignetting problems (I use full-frame lenses on a 1.6-crop body, which cures vignetting in most cases) and don't need to de-fish images (since I don't have a fish-eye) but it can fix those, too.</p> <p>If you use DPP as your RAW converter, then certainly it's beneficial to have these sorts of things incorporated into DPP. But it's not exactly groundbreaking, since other programs such as PTLens, DXO, and ACR have had at least some of these capabilities for a while now. Really, Canon's playing catch-up.</p> <p>*: I use it as a plug-in in PSE3. The PTLens plug-in works at 16 bits; the standalone is limited to 8.</p> Link to comment Share on other sites More sharing options...
wes_baker1 Posted November 27, 2007 Share Posted November 27, 2007 I read somewhere that PTlens can be used inside the Bibble RAW converter. That would seem to be a nice workflow option for some. PTlens is really great, period. I just upgraded DXO to the version that was released last week. Of course, none of the lenses I own are supported for the 40D yet. Guess I'll be using PTlens forever. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now