Canham MQC 5x7, Honestly

[andre_noble4]

What's the honest truth about the stability of the front and rear standards of these cameras, whether you appreciate the man's effort who makes them or otherwise? Do they creep? Users opinion appreciated.

 

<p>

 

There seems to be two opinions on the 4x5 version, the one on this site which is highly favorable. But I was suprised to find elsewhere on net, some very unfavorable reviews, with complaints about the camera's lock downs easily slipping, mushy zero detents, etc.

 

<p>

 

Is Keith making any attempt at all to modify his design on subsequent cameras? Or is there complacency with resting on the camera's good-looking laurels?

 

<p>

 

Thanks for your honest advice. Andre

[carl_weese]

Andre,

 

<p>

 

I had the opportunity to work with this camera for several weeks

(wearing my Contributing Editor hat, researching a magazine article

idea). There may be confusion about two points here--standard

lockdowns, and detents. The lockdowns are just fine, as strong as you

will find anywhere.

 

<p>

 

The detents are barely detectible, by intention. I questioned Keith

about this, and his position is that heavy detents make it difficult

to make small tilts with perfect accuracy. I argued that I might want

exactly 1/2 a degree of tilt twice a year, but have to set up the

camera every time I use it so I want monster, unmistakeable detents.

He was not convinced.

 

<p>

 

The camera is sturdy as a rock once locked down. But the phantom

detents make it much slower to set up in exactly neutral position than

a wooden field camera with the expected strong detents. This is a

concious design parameter and potential customers simply must decide

whether they agree with it or not.---Carl

 

<p>

 

PS: Not all detents are created equal. A recent workshop student had a

4x5 Zone VI field camera whose front standard in "neutral" detent

position introduced nearly five degrees of forward tilt. This

'feature' had quite a bit to do with why the owner was having focusing

problems

[michael_mutmansky1]

Andre,

 

<p>

 

Well, my review of the DLC is on this website, so you know my opinions

of the camera. However, let me reinforce one aspect of the review in

direct responce to your question.

 

<p>

 

My DLC does not creep. If you lock down the standards, it will not

move on it's own. If you are rough with the rear standard while

putting in a filmholder, you may move the standard, if you have not

locked it down solidly. However, if you are gentle with the camera,

you will never have that problem.

 

<p>

 

That's why I mentioned the Thumb-Index Finger technique for loading

filmholders in the review. It is the easiest way to open the back and

slide in a filmholder without applying a lot of force to the back.

 

<p>

 

You have to consider that a view camera has to be sturdy enough to

hold the lens and filmholder in accurate relative position for a

length of time under _reasonable_ environmental conditions.

Complaints that I have seen about the camera range from flex in the

standards to the bellows frame popping out when changing the back, to

the standards not locking down.

 

<p>

 

Once you have the camera set up, load the film (gently, don't slam the

holder in there!) and then let it sit. If the camera is not able to

stay still then you have a problem. If it's windy, the problem won't

only be in the camera, but the tripod and the EPA (effective projected

area) of the camera.

 

<p>

 

What I'm getting at is that Keith makes his cameras 'rigid enough' (in

his opinion) for the tasks that a vc should perform in the

environmental conditions that are reasonable to take a picture with

that kind of camera.

 

<p>

 

All that said, I have not used the MQC, so there may be a fundamental

difference that is not apparent in the two cameras that does not

manifest itself in the DLC. I can tell you that the larger the camera

is, the more important it is to have solid locking mechanisms due to

the increased moment arms that the larger dimensions of the camera

establish.

 

<p>

 

It is possible that the camera is pushing the limits of the lockdown

screws that Keith is using, however, I don't think that this is a real

issue if you are a conscientious camera user.

 

<p>

 

Lastly, this is an issue of perspective. If you are coming from

studio view cameras that are big, heavy, and generally solid, you may

have issues with the MQC over rigidity (remember that phrase 'rigid

enough'?). Also, if you use large, heavy lenses, this can also pose a

problem.

 

<p>

 

I'm very satisifed with my DLC, and although I don't think it is the

'perfect' camera, it does what I need it to do very well. When I get

slippage or standard movement (very occasionally), its because I

wasn't thorough to check that all the locks were sufficiently tightened.

 

<p>

 

My opinion alone, you may come to another given the same experiences

that I have had. That's the beauty of individuality.

 

<p>

 

---Michael

[john_hicks]

I've made the back of my DLC creep into tilt; however, I was trying to get extreme front rise with a short lens with the standard bellows on the camera.

 

<p>

 

Or iow, I was trying to force the camera w/standard bellows into a configuration it simply wasn't designed to do.

 

<p>

 

In normal usage nothing's ever moved.

[michael_kadillak3]

From a user of the Canham MQC 5x7, I can tell you that after many

exposures with this camera, I had no problems with creep. Due to the

design that placed premiums on compactness and to the degree possible

weight reduction, I can tell you that when locked down the back does

have what I would label as a moderate amount of elasticity since it

is hinged at a low base point. But it maintains its position after

film holder insertion and extraction. A simple act of using two

fingers to assist film holder insertion has become a normal part of

the user process and is almost second nature to me when I use the

camera.

 

<p>

 

The bottom line is simply this. I consistently take razor sharp

photographs with this camera without failure and am always thankful

for its nominal weight when I put it and its monogrammed case into

the backpack.

 

<p>

 

I have also been pleasantly pleased with the continued offering of

B&W films in the 5x7 format. I am waiting on another six boxes of T-

Max 100 as we speak. Good Luck.

[skip_roessel]

I've had my MQC for a year and found the tilts were easy to use; a

little experience was necessary to learn how much to load the locks

when tightening them.

 

<p>

 

But I have found the swings difficult to keep sufficiently tight, as

it's tough to get purchase on the knurled thumbscrew. I was horsing

around with this on a shoot last week and was pondering whether to

introduce something in there that would grab better: perhaps a tiny

ring of fine sandpaper or maybe a bit of honey or corn syrup. Dancers'

rosin? Bubble gum, dissolved in gasoline and painted on?

 

<p>

 

But my wife thinks if I put gum or sugar in the joint I'll wind up

dunking the camera in boiling water to reset the controls.

 

<p>

 

Skip