tom_yuan Posted April 26, 2007 Share Posted April 26, 2007 For any D40 owners out there, when you put your ear right next to your camera, does it give a very faint rattling sound, like there's a marble in there sitting in a metal well? Link to comment Share on other sites More sharing options...
tom_yuan Posted April 26, 2007 Author Share Posted April 26, 2007 I meant to say, put your ear right next to the camera and shake it around. Link to comment Share on other sites More sharing options...
aardvarko Posted April 26, 2007 Share Posted April 26, 2007 yes, orientation sensor Link to comment Share on other sites More sharing options...
tom_yuan Posted April 26, 2007 Author Share Posted April 26, 2007 really? can anyone else confirm this? my old Canon SD200 could detect orientation without any (audible) loose objects... Link to comment Share on other sites More sharing options...
Peter_in_PA Posted April 26, 2007 Share Posted April 26, 2007 All of these cameras have an orientation sensor in them, and my D50 makes the same rattle. Link to comment Share on other sites More sharing options...
chris_vincent2 Posted April 26, 2007 Share Posted April 26, 2007 It'll work better if you bring it to your eye rather than your ear. Link to comment Share on other sites More sharing options...
alan_olander1664878205 Posted April 26, 2007 Share Posted April 26, 2007 "really? can anyone else confirm this?" Check the archives. It's been talked about numerous times. Link to comment Share on other sites More sharing options...
tom_yuan Posted April 26, 2007 Author Share Posted April 26, 2007 Thanks everyone for the prompt responses. Link to comment Share on other sites More sharing options...
john schroeder Posted April 26, 2007 Share Posted April 26, 2007 A pixel might have escaped and is now lost inside the camera body. Mega pixels are quite large and can be noisy. Or, it might be the orientation sensor. Link to comment Share on other sites More sharing options...
simon_hickie1 Posted April 26, 2007 Share Posted April 26, 2007 Which reminds me of the time when a (very) junior computer operator dropped a magnetic tape on the floor and was told to sweep up the bits of data that had come off the end of the tape with a special dustpan & brush. He did - then the Ops manager came into the computer room... (I wasn't either person). Link to comment Share on other sites More sharing options...
aardvarko Posted April 26, 2007 Share Posted April 26, 2007 I figured I'd just blatantly lie about an easily confirmed fact. Y'know, for fun. Link to comment Share on other sites More sharing options...
eyeseeyou Posted April 26, 2007 Share Posted April 26, 2007 my 50 rattles too which i was suprised but then i figured out on my own that the rattle was some form of device to tell the camera when the body is taking vertical shots .kinda like the safety device found on some space heaters as a safety device to cut the heater off when it tilts so far .I guess I own a couple of space heaters.these are some expensive heaters and they don't heat very well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now