lanierb Posted January 12, 2007 Share Posted January 12, 2007 Okay, so I took out the focussing screen to clean it thinking it would be like past film bodies I've had and found that it is much more complicated. It has three pieces: the screen, a metal shim, and a metal bracket to hold everything in. When I put it back in in what I thought was the correct orientation, the focussing is very slightly off on the screen (that is, the AF focuses the camera at a point that seems out of focus on the screen, but the AF is right and the screen is wrong). So that means that I think I put something back in wrong. Does anyone know of a source (preferably online) where I can verify the correct orientation of the screen and shim? Thanks! Lanier Link to comment Share on other sites More sharing options...
mark u Posted January 12, 2007 Share Posted January 12, 2007 Try this: https://mywebspace.wisc.edu/haodafu/web/ChangeScreen.pdf Link to comment Share on other sites More sharing options...
lanierb Posted January 12, 2007 Author Share Posted January 12, 2007 Thanks! That link really is tough to figure out, but I got it and the bottom line is that the metal shim was in wrong way around. Lanier Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now