max_anthes Posted September 7, 2005 Share Posted September 7, 2005 Hello! the manual for my 203FE says that the meter is able to measure exposure up to 90s. but with my 203FE togther with a 80mm CFE, the cameradisplay warns me when the exposure would be more than 4s. It reads: "low 4s". what is the problem? is the meter not working correctly or is it because of the CFE lens? regards, max Link to comment Share on other sites More sharing options...
h.p.graver Posted September 7, 2005 Share Posted September 7, 2005 The warning "low" should only appear when the light value is below meter range (0,5 EV at 100 ISO), and the regardless of exposure time or aperture. Link to comment Share on other sites More sharing options...
catherineadams Posted September 12, 2005 Share Posted September 12, 2005 Wilde's book on the hasselblad system explains how to activate this setting. If I'm remembering correctly, you need to be in Manual mode, then press the up/down buttons simultaneously, then input the correct setting. Note that this requires that you know your exposure, whether through a light meter or reciprocity factor. I haven't yet used this, so I might have the technical details wrong. Just pick up the guide at your local library and flip through it--I've found every answer I've ever needed there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now