peter_lui Posted July 23, 2005 Share Posted July 23, 2005 Just got my first Polaroid 545 holder. Inserted type 55 film with holder out of camera (want SEE it go in). I can see and hear the film go to the end and lock in, 545 set to L. Instructions now say withdraw envelope check for pod. Pod is with envelope! Reinsert to click and pull again and again? 5 times, envelope will not separate from film. Take the 55 film out of 545, straighten little metal strip at the end of film, try again with 545 out of camera (yes I know the film will be exposed) no luck. Try with 3 more sheets of 55 film no luck. What going wrong? Thanks. Peter. Link to comment Share on other sites More sharing options...
just eric Posted July 23, 2005 Share Posted July 23, 2005 I had the same problem. There is probably an old end piece stuck in the receiving slot. Go to the SK Grimes site and they have detailed instructions on how to take holder apart. Eric Link to comment Share on other sites More sharing options...
d_purdy Posted July 23, 2005 Share Posted July 23, 2005 As my Polaroid back has gotten old I have become plagued with that problem especially if the box of film has been opened and left out a few days. What you need to do is before you put the polaroid into the back first take your finger and bend out the metal black edge (on the film packet) that catches the catch (inside the polaroid back) You need only bend it out a little and only on the side that is supposed to catch in the holder. then it will make a better connection and usually will work. just a bit maddening. Perhaps you bought your 545 used as when mine was new it never did that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now