mark_d7 Posted May 26, 2006 Share Posted May 26, 2006 My N2020 hot shoe doesnt work. Any ideas what to look for and how to fix? How do you get to it to repair? Im using an SB-20 that works fine on another N2020 body. Thanks Mark Link to comment Share on other sites More sharing options...
photo5 Posted May 26, 2006 Share Posted May 26, 2006 That would probably require a top cover removal, which would mean most shops would want to do a CLA on the camera. It probably needs one anyway, and if the camera is important to you you should probably consider doing one if you haven't in the past few years. Plan on spending around $120 or so. The problem could be simple or not. Dave Link to comment Share on other sites More sharing options...
dan_brown4 Posted May 26, 2006 Share Posted May 26, 2006 KEH sells Ex+ N2020's for $105. Heck, for $200 you can get a very fine N90s, etc. Link to comment Share on other sites More sharing options...
rjclarke Posted May 27, 2006 Share Posted May 27, 2006 Have you tried to clean the contact on the hot shoe? Does the flash sit tight on the shoe? Try moving the flash slightly on the shoe(front to back and side to side) to see if you get contact in another position. Have you tried another flash on this shoe? Might be worth a try. Removing the top is not that hard, get some good screwdrivers. If it is as simple as a bad solder connection under the hot shoe, this is an easy fix. Beyond that, may be too much to try and fix Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now