richard_cook3 Posted December 3, 2004 Share Posted December 3, 2004 I have been experimenting with the above combination with mixed results. I have the correct adaptor 3402M, but I gett eratic exposures when trying to use the units for auto fill in. Is there a setting on the camera that anybody can recommend to overcome these exposure problems? Link to comment Share on other sites More sharing options...
k_michael Posted December 3, 2004 Share Posted December 3, 2004 If you are using "auto" mode with this flash and not TTL, you'll ahve to adjust using the lens aperture or the flash setting. Why not use TTL? Link to comment Share on other sites More sharing options...
richard_cook3 Posted December 4, 2004 Author Share Posted December 4, 2004 The flash is on TTL. I should have mentioned that it is the Matrix fill that seems to be causing the erratic exposures. Talking to other photographers it seems to be a common problem! Link to comment Share on other sites More sharing options...
steve_bingham Posted December 7, 2004 Share Posted December 7, 2004 Try taking it off matrix. You will probably have much better luck with a non-dedicated flash such as the 44. Link to comment Share on other sites More sharing options...
richard_cook3 Posted December 9, 2004 Author Share Posted December 9, 2004 Hi, The flashgun is a dedicated unit with the correct "Nikon" sca module SCA 3402M Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now