always_wanderlust Posted July 15, 2004 Share Posted July 15, 2004 I'm very new to MF photography, I apologize for the question and also if it has already been asked before. What exactly are bellows for? I'm asking because I just purchased a Pentacon 6, and it has an optional bellows I can use. thanks.. Link to comment Share on other sites More sharing options...
donald_brewster Posted July 15, 2004 Share Posted July 15, 2004 Probably for macro/micro photography. Link to comment Share on other sites More sharing options...
tarashnat Posted July 15, 2004 Share Posted July 15, 2004 There are in general two kinds of bellows, those used for lens shades (on the subject side of the lens) and those used for closeup/macro photography (between the lens and the camera). Some also allow limited movements, but these are not as common in MF as in LF. Taras Link to comment Share on other sites More sharing options...
gary_woodard Posted July 15, 2004 Share Posted July 15, 2004 To extend the distance of lens to film plane, Macro-photography. Link to comment Share on other sites More sharing options...
roman_sonnleitner1 Posted July 16, 2004 Share Posted July 16, 2004 You could think of them as 'variable extension tubes'! Link to comment Share on other sites More sharing options...
severi_salminen Posted July 16, 2004 Share Posted July 16, 2004 Bellows are also used on some cameras (like Mamiya RB/RZ 67) for simply focusing the lens -> altering the distance between the lens and the negative. There is nothing special that would limit the usage to macro photography. But as others said, optional bellows are usually meant for close up photography. Bellows are simply elastic light tight material. Quite clever and cheap innovation! Link to comment Share on other sites More sharing options...
fastfirstshooter Posted July 16, 2004 Share Posted July 16, 2004 I shall assume that the bellows to which you are referring is not a lens hood. If you are shooting in MF, I expect you would know one from the other. The explaination following referres to close-up (macro) phoptography. Have fun. Extension Tubes and Bellows Magnification is always a product of extension. The farther away from the film plane a lens is moved, the greater the magnification. To get life size magnification from any lens necessitates adding extension to the lens that is equal to its focal length. As a result, light intensity at the film plane is cut by 2 stops, which produces an aperture two stops less than that which appears in the LCD readout. Thus, a set aperture of f/11 can result in an effective aperture of f/22. Corrected f/stop values can be calculated by multiplying the f/ stop marked on the lens by the actual lens to film distance and dividing the result by the focal length of the lens. Thus: Marked f/ stop X actual lens to film dist Focal length To calculate a bellows extension factor, divide the square root of the bellows extension by the square of the focal length. Thus: (bellows extension)2 (focal length)2 Exposure correction for magnification depends only upon magnification, not focal length. Accordingly, to determine exposure correction for any lens: So, as above: M = focal length of primary ?i focal length of coupled lens. M = 200 ?i 17 M = 11.7 or 12X Where M is magnification , Therefore: ECF = (M+1)2 Where ECF is Exposure Correction Factor Alternatively, EF = (Image Distance (from the film plane)2 (Lens Focal length)2 EA = EF X Ap set on lens Then EA is Effective Aperture Bellows Extension and Effective lens aperture Link to comment Share on other sites More sharing options...
always_wanderlust Posted July 16, 2004 Author Share Posted July 16, 2004 So I could use bellows on Pentacon 6 and my 50mm Lens to do away with Telephotos? Or is it strictly for macro work? I've seen large format field cameras like a Tachihara with bellows and it's used mostly for landscape. Link to comment Share on other sites More sharing options...
frank_a._bridges Posted July 16, 2004 Share Posted July 16, 2004 -->So I could use bellows on Pentacon 6 and my 50mm Lens to do away with Telephotos? Or is it strictly for macro work? I've seen large format field cameras like a Tachihara with bellows and it's used mostly for landscape.--< No. Bellows on a fixed lens camera is used only for focusing. By moving the lens a far distance from the film you can focus up real close. Bellows on a view camera not only allows the user to focus at any distance he chooses but also to use the swings and tilts aspect of the view camera to alter perpective , etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now