tim_kong Posted January 14, 2005 Share Posted January 14, 2005 Hi, I just bought a used 100/2 in mint condition. I heard it is a pretty sharp lense and when I saw one for sale used, I just grab it after checking the physical considiton of the lense. Unfortunately, I can't find the time to try it out yet but I wanted to know if this lense has FTM. Since its used, it didn't come with box and manual anymore. Thanks for any answers. Tim Link to comment Share on other sites More sharing options...
tommyinca Posted January 14, 2005 Share Posted January 14, 2005 Does it has a gold ring that said Ultrasonic in front. If it does, is has FTM capability. I believe Canon may have only make USM (FTM) version on EF mount (I am not sure) for this lens. Link to comment Share on other sites More sharing options...
eric_bell Posted January 14, 2005 Share Posted January 14, 2005 It does. You can see the specs and an MTF chart here: http://consumer.usa.canon.com/ir/controller?act=ModelDetailAct&fcategoryid=152&modelid=7310 The chart predicts that this is a sharp contrasty lens good to the corners stopped down. A little soft wide open but still with very good contrast and uniform performance to the corners. This has been my experience with it on an EOS3 and a 10D. Link to comment Share on other sites More sharing options...
taner Posted January 14, 2005 Share Posted January 14, 2005 Yes, the EF 100/2 can be manually focused full time, without the need to switch to MF on the lens. The question is, do you have the body (read the viewfinder) that will allow you to use it? In my experience, f/2 focusing with non-pro body viewfinders, that goes for film and digital, is kind of like playing the lottery... I cannot stress this enough, after having experienced manual focusing with manual focus cameras of 'yesterday', I find my manual focus experience with non-pro EOS bodies insulting (to me), and totally frustrating. Link to comment Share on other sites More sharing options...
joshchapman Posted January 14, 2005 Share Posted January 14, 2005 To the above poster: one method for MF which I find works fairly well is to use the focus confirmation feature found on some non-pro bodies. The AF points flash if the subject under them is in focus in MF mode. The modern equivalent of a split prism, if you will. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now