randrew1 Posted October 26, 2014 Share Posted October 26, 2014 <p>This is not intended as a film vs. digital debate. There are plenty of good reasons for shooting digital. Digital users can make their own lists in their forums. I can think of a number of reasons to use color neg film. I'm sure others will add many items to this list.</p> <ol> <li>exposure latitude</li> <li>swings and tilts of a view camera and also need short exposure (precluding scan backs)</li> <li>image quality of large format</li> <li>willing to risk a one-time-use film camera on a white-water raft trip</li> <li>already have film equipment</li> <li>because I like film</li> <li>?</li> </ol> Link to comment Share on other sites More sharing options...
Karim Ghantous Posted October 26, 2014 Share Posted October 26, 2014 <p>It's cheaper than slide film, from beginning to end. Shame, because slides 'force' you to get exposure right. And slides are, in one way, easier to scan - because you have the original to compare with the scan. Negatives, though, require 'interpretation'.</p> <p>Also, negative film has superior resolution. From what I have seen, Ektar 100 holds more detail than any 100 speed slide film. It has always been the case ever since Ektar 25 was released. I doubt things have changed. It's a puzzle as to why that is, though.</p> <p>It must be said that negative film just looks good. Fuji emulsions have a certain look which I really like. One of them, 800Z, has been discontinued, unfortunately.</p> <p>I don't shoot a lot of film these days but I'm about to scan some negatives I took a couple of months ago...</p> Link to comment Share on other sites More sharing options...
donbright Posted October 26, 2014 Share Posted October 26, 2014 <p>The varying tonal characteristics between fims.</p> Link to comment Share on other sites More sharing options...
peter_simpson1 Posted October 26, 2014 Share Posted October 26, 2014 I can't find a digital back for my F3? Link to comment Share on other sites More sharing options...
Mike Gammill Posted October 26, 2014 Share Posted October 26, 2014 <p>If you don't mind spending extra money, some labs will deliver excellent scans when they process the color negatives. And, if you use a sufficient volume of film, you can process it yourself with a C41 kit. The local source of C41 processing recently stopped so I'm doing mine at home with a Unicolor C41 kit.</p> Link to comment Share on other sites More sharing options...
SCL Posted October 26, 2014 Share Posted October 26, 2014 <p>To use up my supply....then it will probably be digital for most of my color. I don't want to process color at home, and the places I've used for years have basically shut down.</p> Link to comment Share on other sites More sharing options...
larrydressler Posted October 26, 2014 Share Posted October 26, 2014 <p> Because I have 5K feet of Vision film I can process at home.</p> Link to comment Share on other sites More sharing options...
walter_degroot Posted October 26, 2014 Share Posted October 26, 2014 <p>first i really like film and i am really considering trying my hand at c-41.<br> I haVE MANY FILM CAMERAS. <br> the down side is why many big outlets return prints and scans but noty negatives?<br> why use film if the big boys discard your negatives.?<br> after ex[posing film in a camera with a great very sharp lens why settle for poor quality?<br> this is the argument against using color negative film.<br> I just cannot understand that.<br> there athere are few places that process in the old fashoined way.<br> despite assurances from walmart. I do not trust them to return negatives.</p> <p>my negatives are equiv to 22 mp and the scans are equiv to 6-8mp.<br> why bother.</p> Link to comment Share on other sites More sharing options...
JDMvW Posted October 26, 2014 Share Posted October 26, 2014 <ol> <li>Kodachrome and Polaroid Type-52 are no longer made</li> <li>If I'm going to shoot film cameras the alternatives, practically speaking, are C-41 or D76.</li> <li>C/N and Ilford XP-2 allow shooting at a wide range of settings without having to hit exposure right on the nose.</li> </ol> <p> </p> Link to comment Share on other sites More sharing options...
bebu_lamar Posted October 26, 2014 Share Posted October 26, 2014 <p>I have only one reason is that I already have perfectly good film equipment.<br> I do like to use the view camera and large format but I don't have those equipment. </p> Link to comment Share on other sites More sharing options...
lex_jenkins Posted October 26, 2014 Share Posted October 26, 2014 <p>I don't shoot color film anymore because there are no RA4 minilabs in my area. And I don't want prints made from low quality scans or "dry" prints with obvious scan line artifacts. I can get that at home with my 10 year old printers. Our last pro lab shut down several years ago. Our best neighborhood minilab closed its film processing minilab over a year ago. They only do dye sub prints now, most of which are murky and lifeless, and the printer jams on b&w prints with deep blacks.</p> <p>Too bad. That particular Walgreens had for years been one of the best minilabs in town, because the lab managers were always enthusiastic amateur photographers themselves. I stuck with them and their various Fuji minilabs through the transition from RA4 and optical enlargements, through the early glitches with digital printers, and finally the film-to-"dry" prints phase. Usually they worked out any glitches and delivered good work at a fair price. But when the last lab manager, Valerie, left, and the film lab was ditched in favor of a dye sub printer, I stopped using color film even for snapshots.</p> <p>I realized years ago that I don't have the same relationship with color film that I do with b&w. I don't care a thing about color film itself. I don't sit around gazing lovingly at color slides or negatives. I never did any color darkroom work and have no interest in doing so. It's the prints I relate to. And not fine art prints of static subjects, which mostly bore me, but candid photos of people - family, friends, anyone. For me, color photos represent a link to the past. They aren't timeless but very definitely of an era.</p> <p>Last night I browsed a few dozen color prints of my family dating back to the 1950s, as part of a project I'm assembling for a family book. There were tremendous variations in image quality, due to many factors: the wide variety of cameras, ranging from my dad's Spotmatic to my grandparents' Polaroids and Instamatics; and due to the variations in print processing. Some labs did excellent work - a 1963 Kodak lab print of my dad looks as good as new, with that classic look of accurate, tasteful color. Other labs did terrible work and many minilab prints from the 1970s-'90s are badly faded and color shifted.</p> <p>The vast majority of our Polaroids - from the peel era to the self contained era - look as good as new... and as bad. The Polaroid process is remarkably stable and resistant to fading. It's just that the cameras were often terrible and many photos are out of focus, blurred and badly exposed. Most of the consumer grade Polaroids had awful ergonomics that defied steady handholding: worst of all were the shutter release slider thingies with all the finesse of a grade school paper punch. I kept the earlier bellows types with rangefinder focusing for as long as possible.</p> <p>But I still treasure those prints and try to emulate that look - actually, those looks, because there were many - with my digital snaps and home prints. I've found my technologically obsolete decade-old HP and Epson printers are useful for emulating the looks of lower quality minilab prints and Polaroids. Some generic ink refills produce mediocre results compared with the original OEMs - forget accurate color matching - but are so cheap it's worth trying a dozen prints to get one that looks very much like an older family color snapshot.</p> <p>Find me a minilab doing optical enlargements and RA4 processing, and I'll happily drag that color film out of the fridge. I haven't thrown it out or given it away, so I'm still hopeful.</p> <hr /><center><br /> <img src="http://d6d2h4gfvy8t8.cloudfront.net/17891625-lg.jpg" alt="Family-collage_October 27, 2014__LR4" width="560" height="700" border="0" /><br /> <em>A selection of family photos I perused last night, ranging from the 1950s-'80s, from Kodak's outstanding photo finishing and archival stability, to inferior processing, to peel-apart Polacolor prints. These are what interest me, not the film. Color film isn't a talisman for me, it's just a link in the chain to the family anchor</em>.</center> Link to comment Share on other sites More sharing options...
Uhooru Posted October 26, 2014 Share Posted October 26, 2014 <p>Karim, are you sure that negative film has higher resolution than transparencies? I think slide film is higher resolution than negative film but has less exposure latitude and therefore requires more careful exposure.</p> Link to comment Share on other sites More sharing options...
randrew1 Posted October 26, 2014 Author Share Posted October 26, 2014 <p>Lex's examples raise a good question. When you are creating an album of old family images, do you reproduce the faded and poor color images as they are, or do you restore the color to what it once was (or should have been)? I prefer the latter.</p> Link to comment Share on other sites More sharing options...
randrew1 Posted October 26, 2014 Author Share Posted October 26, 2014 <p>Here's my quick restoration job on one of Lex's images.</p><div></div> Link to comment Share on other sites More sharing options...
lex_jenkins Posted October 27, 2014 Share Posted October 27, 2014 <p>Thanks, Ron, I would indeed try to restore some of those badly faded/color shifted prints. I'm not necessarily looking for accuracy so much as clarity of the people in the photos. Many of my family snaps suffer not only from fading and color shifting but serious exposure problems - flare from backlighting like the example you worked on, under/over-exposure, etc.</p> Link to comment Share on other sites More sharing options...
peterbcarter Posted October 27, 2014 Share Posted October 27, 2014 <p>I shoot less and less c-41 these days. It's a pain getting the chems and not worth sending out. Too bad, as I have a reasonable pile of film here. It will probably rot.</p> Link to comment Share on other sites More sharing options...
dave_s Posted October 27, 2014 Share Posted October 27, 2014 <p>Reasons I shoot color film:</p> <p>(i) Portra 160 and 400 usually give me good skin tones (and other tones), right off the scanner.</p> <p>(ii) I rarely have to horse around with the contrast-- exposed correctly, or a bit overexposed, Portra usually gives me an OK contrast curve with no need for adjustments.</p> <p>(iii) I don't make many exposures, and I don't do this for a living, so I can afford the luxury of using film. And I have excellent developing and scanning about 1km from where I live. </p> <p>(iv) Of course, I don't limit myself to color. I use Ilford XP2 and HP5 as well.<br> . </p> Link to comment Share on other sites More sharing options...
glen_h Posted October 27, 2014 Share Posted October 27, 2014 <p>In recent years I do B&W film and color digital. Except one roll of C41 in a waterproof camera for a trip to Great Wolf Lodge (water park).<br> But I have some C41 and E6 in the refrigerator, when it is the right time.<br> I have 6 rolls of C41 110 film that I bought new and refrigerated soon after. <br> Some rolls of C126 and two rolls of C116 that (so they say) were kept cold, and refrigerated since I bought them. <br> I have a box of Tetenal C41 for some of the above. (Especially C116, as not many labs will do it.)<br> For ordinary family pictures, digital is fine. But sometimes film is still more fun.<br> For E6, the image is created by the unexposed (smaller) grains, and so might be less grainy. But the dye cloud formation usually smooths out the graininess, anyway. </p> -- glen Link to comment Share on other sites More sharing options...
ant_nio_marques Posted October 27, 2014 Share Posted October 27, 2014 <p>1. The colours, which are the film's rather than my boring attempts at matching this or that.<br> 2. The texture.<br> 3. The shadows.</p> Link to comment Share on other sites More sharing options...
CoryAmmerman Posted October 27, 2014 Share Posted October 27, 2014 <p>For me, shooting film is all about the image capture process, rather than the end result. Over the last few years I've accumulated a rather sizable collection of film rangefinders, SLR's, and TLR's. Most of them for pennies on the dollar compared to their original prices. I enjoy the challenge of using old mechanical cameras in much the same way a classic car enthusiasts enjoy restored antique autos. </p> <p>While I prefer B&W to color, I've been shooting more C41 these days due to the ease of dropping it off at the local Wallgreens for processing, rather than processing B&W at home. I have a 9 month old at home and another on the way and it's hard to find the time to process film at home these days. I haven't even set up my darkroom since buying our house a year ago. When the kids are old enough to occupy themselves for a little while, I'll probably get back into doing more home processing and printing.</p> Link to comment Share on other sites More sharing options...
larrydressler Posted October 27, 2014 Share Posted October 27, 2014 <p>If you are not going to use it I know I can find homes for that film where it will be shot and processed.</p> Link to comment Share on other sites More sharing options...
wogears Posted October 27, 2014 Share Posted October 27, 2014 <p>I shoot Portra because of the skin tone that is very hard to get with digital. I like the highlight roll-off of film, which is (again) difficult to match with digital. OTOH, I needed ISO 3200 this morning, so I grabbed the Fuji.</p> Link to comment Share on other sites More sharing options...
bgelfand Posted October 27, 2014 Share Posted October 27, 2014 <blockquote> <p>I don't shoot color film anymore because there are no RA4 minilabs in my area. And I don't want prints made from low quality scans or "dry" prints with obvious scan line artifacts.</p> </blockquote> <p>Lex, I do not know where you live, but if you have a Costco near you, I highly recommend them for prints. Unfortunately, many of the Costco locations no longer develop film. </p> <p>I have my film developed only then scan it on a Nikon Coolscan V, post process in Photoshop, convert to the Costco profile (Costco profiles their printer and posts the profiles on <a href="http://www.drycreekphoto.com/">http://www.drycreekphoto.com/</a>), then upload the JPEG or TIFF to Costco for processing. I am not a pro but I am very happy with the results.</p> Link to comment Share on other sites More sharing options...
Wouter Willemse Posted October 27, 2014 Share Posted October 27, 2014 <p>I honestly cannot say I am still shooting colour negative film. I'm finally shooting some. Or at last, at least, since not all that long. And while I anticipated to shoot mostly B&W, I actually quite enjoy colour too. The colour rendering (I can hardly find anything else locally than Kodak ColorPlus, which isn't great but I like it for its flaws I think), highlight roll-off and the way of rendering sharpness/contrast are different enough from digital to be a creative alternative, a good option to have.<br /> The cameras I've got are just great tools; I like using them. They don't replace my DSLR (which I also like a lot), but they make a good addition, occassionally an antidote against the high-volume-digital, occassionally forcing an alternative approach, and at least they bring some fun to my photography. The simple controls (or lack of additional and not strictly necessary controls) is refreshing, and helps reconsidering what really matters in getting a halfway decent photo.<br /> I do not really subscribe to the "film slower working makes me better"-school, because with the DSLR I can do the same. It's more about having different tools, to which I react differently. Sometimes, the direct feedback of digital is gold. But more and more often, I do like the lack of it - do the best I can to get the shot I hope for, and then.... wait, and see if I did. It's educational in a different way than the direct feedback is, and both valuable to me.<br /> <br /> No problem here to get a lab to develop it; I scan afterwards on my simple but nice filmscanner, which easily beats the automated scans that come from the lab. What I really seriously like about film is coming home with the 10*15 prints and look at the photos. It's a silly little moment that's gone in digital, and I like it. A lot.</p> Link to comment Share on other sites More sharing options...
alan_ginman Posted October 28, 2014 Share Posted October 28, 2014 <p>"When the kids are old enough to occupy themselves for a little while, I'll probably get back into doing more home processing and printing." My daughter is 8 and I'm only anticipating more free time when she goes to university.</p> <p>Meanwhile when the urge to use film strikes me I generally use C41 black and white or colour films. The main driver for me to use film is to use a number of old film cameras that I have acquired recently. Both colour and black and white C41 films have amazing latitude to compensate for dodgy shutters, guessed exposures etc. I've rated XP2 at everything from 50 to 3200 ISO and got usable results.</p> <p>Cheers</p> <p>Alan</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now