Which lens hood for Fuji 125mm CM-W 5.6 ?? Help

Discussion in 'Large Format' started by www.antiquecameras.net, Aug 10, 2006.

  1. Just bought a new Fuji 125mm 5.6 CM-W to shoot 6x17 with ( stopped down to F32
    with no movements and it covers nicely ).... 125mm on 6x17 roughly equates to
    a 32mm lens on 35mm film.... so, should I use a "wide angle" lens hood .... or
    an "ultra-wide" angle hood or since I am stopping way down, can I use
    a "normal" lens angle ( 50mm on 35mm) type hood ? thanks
     
  2. The best way is to use a shade like the ebony one:
    www.ebonycamera.com/media/acc/acc.shade.clip.jpg&imgrefurl=http://www.ebonycamera.com/acc.html&h=192&w=176&sz=7&hl=en&sig2=sbNqeiFoeF8FouDx-F1S3Q&start=2&tbnid=_XE1JXnv9rhEAM:&tbnh=103&tbnw=94&ei=lozcRKQPzoTBAZva3LEJ&prev=/images%3Fq%3Debony%2Bshade%26svnum%3D10%26hl%3Den%26lr%3D%26sa%3DG
    You can use a wiggly and use a piece of cardbaord or even better the smaller kodak grey card that serves other purposes...
    picture enclosed you can get the anywhere
    Tim
     

Share This Page

1111