mark45831 Posted March 4, 2019 Share Posted March 4, 2019 I have been looking at some new straps, Altura Photo Rapid Fire Pro Camera Neck Strap gets good reviews for a decent price, what do you use? Link to comment Share on other sites More sharing options...
mike_halliwell Posted March 4, 2019 Share Posted March 4, 2019 OP/TECH 1503372 Pro Loop Strap Got one on each of my DSLRs. Does a good job of taking out the bounce/shock of a D500 + 50-100mm1.8 around your neck all day when shooting horse cross-country. ... and I like the loop through itself method. Never had one fray either. They do a very handy wrist strap for long teles too. 3 Link to comment Share on other sites More sharing options...
Dieter Schaefer Posted March 4, 2019 Share Posted March 4, 2019 (edited) I have the Peak Design Cuff (a wrist strap: Cuff; I use mostly the older version though that doesn't have the metal slider: Peak Design Cuff Camera Strap Review (2017 Version)) on all my camera bodies. On the rare occasion that I feel the need for a shoulder strap, I use the Peak Design Slide (https://www.peakdesign.com/collections/straps/products/slide); I am more likely to carry a digital holster than a neck strap though. My first experience with sliding straps was with Carryspeed - I still have two of their straps floating around - good as new as I hardly ever used them - mainly because they were incompatible with using Arca-Swiss-type camera plates and required their own mounting plates. and I like the loop through itself method. Never had one fray either Precisely why I like the Peak Design - their anchor links are small and can stay on the camera; they also seem less prone to accidental release than those clips on the Optech (used their wrist straps for a while before Peak Design appeared on the scene) Edited March 4, 2019 by Dieter Schaefer Link to comment Share on other sites More sharing options...
mike_halliwell Posted March 4, 2019 Share Posted March 4, 2019 Peak Design Cuff Looks good! Is the black, err, 'socket' a hard plastic or alloy? Their product listing on Amazon says... Dyneema Anchors alert you to wear and tear. I guess that's the toggle bit? How easy and positive is the connect and disconnect? Link to comment Share on other sites More sharing options...
Bill J Boyd Posted March 4, 2019 Share Posted March 4, 2019 Optech on my D850 Link to comment Share on other sites More sharing options...
Hector Javkin Posted March 4, 2019 Share Posted March 4, 2019 Upstrap. Cameras hang from my shoulders, never my neck. Link to comment Share on other sites More sharing options...
Dieter Schaefer Posted March 4, 2019 Share Posted March 4, 2019 (edited) Is the black, err, 'socket' a hard plastic or alloy? Plastic. Dyneema Anchors alert you to wear and tear Those are the anchor links - the "wear and tear" indication refers to the piece of string which has a colored string embedded - its appearance will indicate wear and one should replace the anchor link at that time. IIRC, then these anchor links are on V4 now - there have been issues in the past with their 1st version and then again with their 3rd (which they replaced free of charge with V4 ones): 2018 Anchor Update How easy and positive is the connect and disconnect? To connect, you push the link into the trapezoidal portion and slide into the round portion and/or pull on the strap to lock it into place; an audible click indicates that it indeed locked securely in place. To remove, push the anchor disc down and slide it out; so far I have not accidentally or unintentionally disconnected the strap from the anchor. I am not fond of the metal slider on the new Cuff design - but a piece of gaffer tape around it "takes the edge off" and prevents scratching the camera or lens when inside the bag. Edited March 4, 2019 by Dieter Schaefer 1 Link to comment Share on other sites More sharing options...
BeBu Lamar Posted March 4, 2019 Share Posted March 4, 2019 I always used the Nikon AN-4Y since the late 70's. Link to comment Share on other sites More sharing options...
Ed_Ingold Posted March 4, 2019 Share Posted March 4, 2019 I use Magpul single-point (rifle) straps with mil-spec quick connects. Really Right Stuff has sockets milled in base plates and L-plates for that connector. This is a cross-shoulder strap, which keeps the weight centered on your spine, and the camera in a handy, ready position at your side. There's nothing to come unscrewed, yet it's easy to remove for use on a tripod. It is relatively comfortable with a heavy lens attached to the camera, like a 3+ pound Sony 100-400 GM. I have used Sun Sniper straps in the past, similar to Black Rapid but with better connectors. Both have a swivel which screws into the tripod socket. In theory, the swivel should slide on strap so it doesn't move when you raise the camera. In practice, the strap tends to twist and stick in the swivel. I've never had one come unscrewed, but am obsessive-compulsive about checking it every 10 seconds or so anyway. You could tow a car with the Magpul straps an connectors. As a preventive measure, I use a little TFE grease on the connector. It is Parkerized, but can stick when exposed to weather for a long time. It's not very stylish, but you could pin pieces of flair on it, to make it seem more contemporary. Link to comment Share on other sites More sharing options...
SCL Posted March 4, 2019 Share Posted March 4, 2019 I make my own tailored to my particular demands. Link to comment Share on other sites More sharing options...
JDMvW Posted March 4, 2019 Share Posted March 4, 2019 (edited) The neoprene straps from Op/Tech and others are good for cushioning the weight of the camera. For really heavy lenses+camera I find the BlackRapid strap to be the best I've ever used. (RS7 LINK) Edited March 4, 2019 by JDMvW Link to comment Share on other sites More sharing options...
Ed_Ingold Posted March 4, 2019 Share Posted March 4, 2019 If you use a neoprene strap, don't rely on neoprene alone. The better Black Rapid and SunSniper straps have a nylon strap backing the neoprene. Neoprene can fail without warning once it ages or is subject to chemical attack. Link to comment Share on other sites More sharing options...
bgelfand Posted March 4, 2019 Share Posted March 4, 2019 For a neck strap, the Nikon strap that came with my D750. Recently, if I am going to carry the camera for any length of time, a Cotton Carrier G3 harness. Link to comment Share on other sites More sharing options...
Vincent Peri Posted March 4, 2019 Share Posted March 4, 2019 I use the Nikon wide strap AN6 in either burgundy or yellow. Link to comment Share on other sites More sharing options...
mike_halliwell Posted March 4, 2019 Share Posted March 4, 2019 The better Black Rapid and SunSniper straps have a nylon strap backing the neoprene ...as do the OP/TECH Pro Loops. Firmly stitched through with the deliberate slack to allow controlled, but limited, stretch. Link to comment Share on other sites More sharing options...
michael_vail Posted March 5, 2019 Share Posted March 5, 2019 UPStrap - great little company; the only strap I use and recommend. Check out the HD Rapid Release Clips and Vectran Loop Ends. Nice large comfortable pad, doesn't dig into my shoulder and doesn't slip. Very well made and a good value. Link to comment Share on other sites More sharing options...
steve_g2 Posted March 5, 2019 Share Posted March 5, 2019 I have these guys make 'em: Strapworks - Straps, Webbing, Tie-Downs, Buckles & More Link to comment Share on other sites More sharing options...
Mary Doo Posted March 5, 2019 Share Posted March 5, 2019 I like a very simple neoprene non-slip strap that is unobtrusive. I avoid the big Nikon strap that comes with the camera, or some big wide brand name straps. I sampled a lot and finally found the most comfortable and practical in no-name simplicity and low cost. Link to comment Share on other sites More sharing options...
heimbrandt Posted March 5, 2019 Share Posted March 5, 2019 I have been using a black Domke 1" Gripper with swivel quick release since before the turn of the century. I was still on my first when I last summer replaced it with Domke's 1.5" model, also in black. The 1" looks like the black belt of a true martial arts master, worn, very worn, but still does the job. When visiting Grays of Westminster last autumn I bought Nikon's 100th Anniversary strap in black leather. Its Nikon logo is debossed and does not stand out in any way. It has been on my D850 since but either Domke may find their way back to my camera. Link to comment Share on other sites More sharing options...
mike_halliwell Posted March 5, 2019 Share Posted March 5, 2019 Altura Photo Rapid Fire Pro Camera Neck Strap Just had a look at it. It's not a neck strap at-all. It's a shoulder strap! or, as the chap in the video calls it a Cross-Body Strap. Link to comment Share on other sites More sharing options...
Albins images Posted March 5, 2019 Share Posted March 5, 2019 My addition: - I have an Op/Tech neoprene strap on one of my (relatively heavy, because '90s Leica) binoculars, that is almost perfect.. - BUT I have iMo straps on my camera and other binoculars, simply because they look great and fun and that fact alone makes me want to grab both more often! (minor minus: these straps are a bit too long for my use). Link to comment Share on other sites More sharing options...
rodeo_joe1 Posted March 5, 2019 Share Posted March 5, 2019 Depends how you walk. If you have a 'bouncy' stride you may find that neoprene foam straps are too elastic. I don't really like 'em for that reason, and I certainly wouldn't want to run with one and a heavy camera attached. You'd have the camera grabbed in your hand anyway, to stop it smacking you in the face or somewhere. The Nikon wide fabric strap does me just fine. 1 Link to comment Share on other sites More sharing options...
stuart_pratt Posted March 5, 2019 Share Posted March 5, 2019 I always have my cameras in a CCS camera case, worn over the shoulder on the LHS, with the case to the RHS (so the strap is over my head as well as my shoulder). Difficult to be grabbed by some passing thief that way. As for straps on cameras, I have always found the Nikon broad ones sufficiently 'sticky' but I have a narrow leather one on my Leicaflex due to vanity, sufficiently long to be worn over the shoulder as described above. Link to comment Share on other sites More sharing options...
robert_bouknight1 Posted March 5, 2019 Share Posted March 5, 2019 The cloth Nikon strap that came on one of my F2s is nice for a medium weight camera. It tapers from triangle width to a little under 1" wide. .Nikon yellow, of course but it would be better in all black. For lighter cameras (my future Z), I like the simple 1/2" leather or cloth straps. As far as more modern Nikon straps go, the ones that came with D1 and D2 series cameras seem better than the more synthetic ones on D810 cameras, the later ones don't seem to breathe. I keep waiting for someone to ask if I am still using a D1. On another camera, I have a D2xs strap (Digital to Excess!) Link to comment Share on other sites More sharing options...
Ed_Ingold Posted March 5, 2019 Share Posted March 5, 2019 ...as do the OP/TECH Pro Loops. Firmly stitched through with the deliberate slack to allow controlled, but limited, stretch. My mistake. Op-Tech Pro is the strap I meant, with a wide neoprene strap backed up by a narrow nylon strap. Black Rapid and SunSniper have a narrow strap with a shoulder pad, which inevitably migrates from your shoulder toward the camera end. The Magpul strap is all mil-spec, heavy duty, about 1-1/8" wide, and needs no pad. The entire strap moves freely on your shoulder, without a sliding swivel. They're about the same price from RRS or a gun supply store. Not exactly a fashion statement, but black and inconspicuous. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now