david_carson Posted August 24, 2004 Share Posted August 24, 2004 For all of you who are having problems centering your prints in OS X 10.3.x with your Epson 2200, below is what Epson sent to me, and it works. For background, I simply could not get the prints to center (with Photoshop CS; I didn't try other programs)...some users had a "stylus 2200, margins minimized" option, but I didn't. I either had to manually center in the print preview area, or make an equalized-margin custom paper size in the page setup area. The following solution worked: **********FROM EPSON********** Thank you for contacting the Epson Connection. Please follow the steps below and use the minimize margins driver to centeran image. To correct the issue you are experiencing we will need to perform acomplete removal of the files and reinstall the driver. The most currentversion of this driver allows for borderless printing, roll paper support,and maximized margins. DRIVER REMOVAL Note: If there are any other Epson printers on your Mac, please let usknow what models you are working with before trashing the Epson folder. Wewill recommend a compatible driver to reinstall after the SP2200 driver isset up and functioning. 1. Double click on the MAC HARD DRIVE.2. Double click on the LIBRARY folder.3. Double click on the PRINTERS folder.4. Drag the EPSON folder to the trash can. If you receive an access denied error message when attempting to removethis folder it indicates that you do not have Root Access. You will need tocontact Apple for assistance on obtaining root-level access to theoperating system in order to remove this folder. Please follow the steps below to download and install your printer in OS X: 1. Go to the following website: http://support.epson.com2. Under the PRINTERS heading select INK JETS and then the Stylus Photo2200.3. Under the DRIVERS & DOWNLOADS section select MACINTOSH.4. Select "PrinterDriver V.1.8aAs" for Macintosh OS X (Epson11019.sea.hqx).5. Follow the prompts through the survey and license agreement. TheDownload Manager will take over and save the file to the desktop for you. DRIVER REINSTALL 1. After the download is complete, double click EPSON11019.sea.hqx file.Click CONTINUE, then CONTINUE again, then OK on the INSTALLATION WASSUCCESSFUL screen. 2. Open the new "Epson11019" folder created by the extraction process. 3. Double click the file inside which has a .DMG extension. This willcreate a hard drive icon on the desktop named SP2200. 4. Double-click to open this DISK IMAGE file. Here, you will see anINSTALLER file - double-click this icon to start the installation process. 5. The next menu will prompt you to ensure that you have AdministratorRights to install the printer driver. Click on the lock (if necessary) toauthenticate and enter your password. 6. The actual installation process will begin. Follow the prompts toinstall, click CONTINUE, AGREE for the SOFTWARE AGREEMENT, and so on. Youwill be prompted to select a disk to install the printer to. Select theappropriate OS X hard drive or partition and click CONTINUE. In the nextwindow that appears, click INSTALL. 7. You should now be informed that the computer needs to be restarted afterinstallation; click CONTINUE INSTALLATION here. The driver will now beinstalled and the system optimized. Restart the computer when prompted. 8. After the computer restarts, open your PRINT CENTER or PRINTER SETUPUTILITY (found in HARD DRIVE, APPLICATIONS, UTILITIES). Make sure yourprinter is powered on and connected at this point. 9. If your printer is listed, simply highlight it and click DELETE. Oncethe printer has been removed from the PRINT CENTER or PRINTER SETUPUTILITY, click the ADD button. If your printer is not listed, click theADD button. 10. From the drop-down menu, select EPSON USB for a USB connection, orEPSON FIREWIRE for a Firewire connection. Once your printer has appearedunder PRODUCT, click on the name to highlight it. 11. Once the printer is highlighted, a Page Setup menu will appear at thebottom of the window. Click the up-down arrows at the end of Page Setup andselect ALL then click ADD. ("ALL" must be selected to get all the addedpaper features of this driver.) 12. You will now see multiple listings in the Printer list for your StylusPhoto printer. Highlight the printer name which does not have a paper typeattached (ie Stylus Photo 2200 or Stylus Photo 2200 (Standard) if no plainprinter name appears) and click on MAKE DEFAULT. Close Print Center. 13. Ensure Classic is not running. Open an OS X application and a file thatyou wish to print. When ready go to FILE and PAGE SETUP ensure that under"Format for" you have selected the printer name plus paper feature you wishto use. (NOTE: If printing from 10.3, make the feature you wish to usedefault in the PRINT CENTER or PRINTER SETUP UTILITY and match it on PAGESETUP in the program you are printing from.) You are now ready to tryprinting. SETTING UP BORDERLESS PRINTS IN AN OS X APPLICATION(NOTE: not all applications will show these options) 1. Click on FILE and PAGE SETUP. Ensure the settings below are adjusted: SETTINGS: PAGE ATTRIBUTESFORMAT FOR: EPSON STYLUS XXX XXX(BORDERLESS)PAPER SIZE: Whichever compatible paper size you wish to use(NOTE: borderless printing is not supported on custom paper sizes.)Click OK when done. 2. Click on FILE and PRINT. Ensure the settings below are adjusted: PRINTER: Stylus XXX XXX(BORDERLESS)PRESETS: STANDARD Make any other adjustments needed (on COPIES and PAGES, PRINT SETTINGS,etc) and then click PRINT. If you require further assistance with this particular issue, please ensureall of our previous correspondence is contained in your reply, so we canbetter track the history of this issue. If you have a different technical support issue, please submit anotherE-form via our website (http://www.epson.com), and we will respond in atimely manner. Thank you again for contacting Epson. Christopher OEpson Connection Link to comment Share on other sites More sharing options...
paul_sauer Posted August 24, 2004 Share Posted August 24, 2004 I'll give this a try. It has been driving me nuts and causing me to avoid printing photos that I normally would print and have frames. Thanks. Link to comment Share on other sites More sharing options...
jmw__ Posted August 25, 2004 Share Posted August 25, 2004 Ugh. A standard "delete the driver and reinstall" response. Nothing in it that specifically addresses your problem. Basically, it's a tech support punt. I don't know if this is a Photoshop-related issue or a driver-related one (or both), but for what it's worth, just about every Mac OS X - Epson 2200 owner that I know experiences this problem. It's a royal pain in the ass. Also happens on my 1280. Link to comment Share on other sites More sharing options...
david_carson Posted August 25, 2004 Author Share Posted August 25, 2004 JMW, If you care to read the post, the Epson solution actually works. I had tried upgrading the driver, but that didn't work. You must follow the directions to the letter. Link to comment Share on other sites More sharing options...
jmw__ Posted August 25, 2004 Share Posted August 25, 2004 David: Didn't mean any disrespect, but I e-mailed Epson about several different issues (including uneven printing) and got back the same exact letter. In my experience the solution works for a while but somehow my prints revert back to uneven margins (rinse, repeat). This could be due to human error, the fact that I interchange printers often, or some other factor related to software upgrades and installations. So, basically, I don't have a long term fix. Your mileage may vary. Happy printing. Link to comment Share on other sites More sharing options...
david_carson Posted August 25, 2004 Author Share Posted August 25, 2004 JMW, Ah! I see what you were trying to get at, now that you've explained it further. I do agree that something is fishy. Link to comment Share on other sites More sharing options...
mattmikulla Posted March 29, 2005 Share Posted March 29, 2005 Epson developers just stink. Really. How hard is it? It has been years since the 2200 has been out and they still can't get it right. Make a decent driver. It is not that hard. Link to comment Share on other sites More sharing options...
sherill_watts Posted May 27, 2008 Share Posted May 27, 2008 The missing link in their instructions (at least for me) ... 10. From the drop-down menu, select EPSON USB for a USB connection, or EPSON FIREWIRE for a Firewire connection. Once your printer has appeared under PRODUCT, click on the name to highlight it. THIS IS WHERE IT WENT WRONG - CLICK THE MORE PRINTERS BUTTON TO GET THE PAGE SET UP DIALOG BOX THEY REFER TO BELOW. THIS IS WHERE YOU CAN HIGHLIGHT YOUR PRINTER AND SELECT ALL. 11. Once the printer is highlighted, a Page Setup menu will appear at the bottom of the window. Click the up-down arrows at the end of Page Setup and select ALL then click ADD. ("ALL" must be selected to get all the added paper features of this driver.) ... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now