preston_jones Posted April 29, 1998 Share Posted April 29, 1998 I have a 4x5 Super D Graflex. When I look down in the hood at the ground glass, the bottom 1/3 appears out of focus. I checked and the focus is ok on the graflok back. Who would be a good repair shop to have correct this problem? Is this something I would be able to do? Link to comment Share on other sites More sharing options...
chris_hale Posted May 1, 1998 Share Posted May 1, 1998 Probably your mirror is not sitting at the correct 45 degree angle. Check inside to see why not. Alternatively, perhaps your groundglass and fresnel lens are not mounted correctly in the opening at the top of the camera. It would need to be a lonnnng way out to defocus 1/3 of the image though. The really nice thing about "American Low Tech" cameras is that you can probably adjust it yourself if you can accurately measure the mirror angle. As an experiment, focus the camera on a brick wall using a focussing panel in the film plane and then see what happens to the focus on the groundglass when you release the mirror but only let it rise a little, held from behind with a strip of tape and a string. Don't let the shutter release while you're trying this. It will probbly show you in what direction your mirror needs to be adjusted. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now