Jump to content

reliable 2nd hand R camera body


Recommended Posts

I wonder if anyone could recommend a reliable 2nd hand body to attach

to a 3 cam 90 f2 lens for portraiture. There seem to be a few horror

stories about early R4s and R8s for example - is the R6.2 the only

answer? What about the R6 and R5? The sites I have found have 2 or 3

people who take, typically, diametrically opposed views based on only

one experience, be it positive or negative. I suppose it's much to

much to ask for something approaching objectiv

Link to comment
Share on other sites

I owned a late production R4, and it was a very good picture taker.

The only thing I had to do was the back door foam kit. I enjoyed

using it, but made the mistake of keeping my eye out for a reasonably

priced R7. I sold the 4 to help pay for the 7, and kind of wish I'd

of hung on to it as a second body. The 7 is a nicer camera,with ttl

flash and modern elecronics, a smoother shutter, 1/2 shutter speeds

on manual,and mirror lock up. In reality, the pictures I take with it

are not better than the ones with the 4, as the lenses are the same,

and the 4 has a very good metering system. Pick up a clean 4 or 5

for a good price if you can, or save up another $400 and find a nice

7.

Link to comment
Share on other sites

Original R6 and R5 will be fine. But they are not cheap. If you can

put up with non-hotshoed flash then the SL (or SL2 even better and

has a hotshoe) is your best bet. They are cheap too. Balances

beautifully with the 90 Summicron. The SL has a less sensitive meter

(so low light below 1/30 @ f2 with ISO 50 is inaccurate, but above

that it is very reliable (it does take the mercury 625 cell though).

 

<p>

 

I would also look at the R8 as it is loosing its value secondhand

versus the R6.2. I have seen excellent examples at $1200. The R8 is a

good camera, just bigger- but it is wonderfully ergonomic.

Link to comment
Share on other sites

Look at the R3. It is not as fashionable as the later R cameras and

not compatible with most of the extra gimmicks like winders or

databacks - but it is a _cheap_ (as low as 150US$) and very reliable

camera. Beatiful to operate too. Be aware that you might have to

replace the light trapping foam around the backdoor on older models.

Replacemant might be available free from Leica customer service if you

ask politely (Well at least it worked for me).

Link to comment
Share on other sites

  • 2 weeks later...

The 6.2 isn't the "only" answer. But after you've bounced around the

R4s, R5, R7, and so on, you'll eventually come across the R6.2 and

say "so that's why the price has remained relatively high". I believe

you get what you pay for in the long run.

Link to comment
Share on other sites

  • 4 weeks later...

For a secondhand body, I think the RE can't be beaten. It is cheaper

than R7, R6 and 6.2, and very reliable. Good meter too. Also has TTL

flash tho' not as sophisticate as that on the R7 or 8 but good enough

for portrait work. But if you are already willing to pay the price of a

R6.2, then I think the R8 is a much better option. Contrary to some

reports, I have one since '97 and use it often without any problems.

Link to comment
Share on other sites

  • 2 weeks later...

As a fairly recent Leica R convert, who has been through this

decision process, here are my impressions:

 

<p>

 

R4:I believe the price of used R4 bodies is artificially low, due to

the many electronic problems with the early production models. A lot

of knowledgeable Leica folks think that most any R4 still functioning

has already been sorted out by Leica. My experience seems to bear

this out, as I purchased an early model, ( From the supposedly, "

Bad," serial number batch,) yet my camera works perfectly. To me, it

seems like a bargain at $ 400.US

 

<p>

 

R4s: All of these were built after Leica had sorted out the problems

with the earlier cameras. As a result they are higher priced. R4s has

the same functions as R4, minus shutter priority, and full program

mode.

 

<p>

 

R5: I think all R5's were built in Germany, ( Rather than Portugal.)

These are functionally similar to the R4, with the addition of faster

1/2000 top shutter speed, and TTL flash control. R5 is so popular,

that nice examples sell for around $900-1,000.US, which begs the

question, " With good used R 6.2's selling at around $ 1,200, why

spend a grand on a much older R5?"

 

<p>

 

RE: I believe this is basically the same as an R5, except that it

does not have shutter priority, or full program mode.

 

<p>

 

R6: For some reason I cannot comprehend, Leica reverted to a top

shutter speed of 1/1000 for the R6. Again, these are so high-priced

on the used market, why not spend the extra for the R6.2?

 

<p>

 

I think you'll be happy with any of these bodies, just pick the one

that has the features you want at the price you can afford.

 

<p>

 

Check out this link to a good resource of what to look for in a used

Leica R body: http://www.angelfire.com/biz/Leica/page6.html

 

<p>

 

Here is a link to better descriptions of the differences between the

R models: http://teachnet.edb.utexas.edu/~leica/leicaslr.html

 

<p>

 

J.Horton

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...