Nikon Scanner LS 9000

My Nikon LS 9000 scanner stopped displaying image on preview or image on the desktop when button pushed. The mechanics all work, the sounds of scanning are the same just no image. The data of size and mg is displayed on the bottom as usual. Is there a bulb in there that may have burnt out, I recall seeing a white light when scanning now I see a green light scanning.

It may not be the scanner but check for flickering LED anyway ...

You are getting a data size at the bottom which means the scanner scanned the image, so it might be software trouble

 

Scanner status is indicated as follows:

Status LED

 

LED Blinks

Scanner busy.

 

LED Flickers

1.5 ×/second)

error. Turn scanner off, wait

about for at least 5 s, and turn scanner on again

 

Parts Of The Scanner - Nikon 9000ED User Manual [Page 12] Page 12

It may not be the scanner but check for flickering LED anyway ...

You are getting a data size at the bottom which means the scanner scanned the image, so it might be software trouble

 

Scanner status is indicated as follows:

Status LED

 

LED Blinks

Scanner busy.

 

LED Flickers

1.5 ×/second)

error. Turn scanner off, wait

about for at least 5 s, and turn scanner on again

 

Parts Of The Scanner - Nikon 9000ED User Manual [Page 12] Page 12

Thanks so much that worked!

Unfortunately, these things are not immortal.

 

Checking connections and "rebooting" are always good first steps. Glad yours is "back".