Need help replacing old novatron flash head

Hey if anyone can help me it would be greatly appretiated. Here's my

problem: I recently bought an old novatron 440 plus power supply and

3 novatron flash heads with 100 watt modeling lights. The flash

heads are rated as follows: 1 480ws 1 240ws and one 120 ws. I paid

1000 for this kit along with 2 large softboxes, and a large hand

painted muslin. When I got the kit home I discovered that one of the

flash tubes was broken (in the 120 ws light). The modeling light

still works fine. My first question is can I replace it with a new

head. If so where could I find it and what do I look for as far as

compatability goes. The kit is very old,1984 or so...

<a href= "http://www.novatron.com/"> Novatron.com <a/>

Hey Dan, I think you'd get a better response if you posted this question six or seven more times.

I will not post so many times again. I was just feeling kind of stupid for buying such a crappy system without researching it first. I was wondering if any one knew how if I could buy a 1000vr novatron kit and piggyback it to my 440 plus. If so could you please tell me how and what I would need to do it. I really would appretiate any help. Again sorry for the multiple postings.

 

Thank you