dane_hupp Posted March 22, 2018 Share Posted March 22, 2018 I have a Minolta hi matic 7s and the film advance lever does not turn the gears under the baseplate to cock the shutter. It just turns forward and back with only the tension of the springs under the top plate. I have attached a pic to show the issue. The bottom arrow points to the cylinder that turns with the film advance and the top arrow points to the gear that should turn with it to activate all the gears and cock the shutter. Any help on what might be the issue and how to get to it. Thanks, Dane Link to comment Share on other sites More sharing options...
greg_nixon2 Posted April 4, 2018 Share Posted April 4, 2018 I have a couple of these cameras. One has been serviced and is working well. The other is still dismantled. If you want any photos or have questions, now is the time to ask. The lower arrow points to a gear that is turning on the film advance and return stroke, while the upper arrow and gear turn on the advance stroke, but not on the return stroke. I imagine you have checked the obvious, like loose grub screws at either end of the advance rod. Best of luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now