ray . Posted May 25, 2019 Share Posted May 25, 2019 I just turned the lock on the bottom plate of my M7 and started to remove the plate with film inside. I didn’t pull the opposite end of the plate more than 1/4, maybe 1/3 of the height of the plate that seats to the bottom of the body, so not close to actually opened on that end. I had never done this in 35 years using a Leica, but have done it twice now in a week! This film is at frame 5. I caught myself and immediately pushed it back and re-tightened the lock. What are the chances I leaked light to the film? Should I advance a couple frames and keep shooting? Link to comment Share on other sites More sharing options...
JDMvW Posted May 25, 2019 Share Posted May 25, 2019 What are the chances I leaked light to the film? Should I advance a couple frames and keep shooting? The chances are good that there has been some light leakage, but the bottom loading does mean that much of the images may still be usable. The film inside the canister is OK, probably. If the images are one-of-a-kind from a now lost moment, I personally would start over with a fresh load of film, process the exposed roll, and try to learn from it. If you're just clicking around, keep on shooting and hope for the best. :| Link to comment Share on other sites More sharing options...
Bill Blackwell Images Posted May 25, 2019 Share Posted May 25, 2019 I just turned the lock on the bottom plate of my M7 and started to remove the plate with film inside. I didn’t pull the opposite end of the plate more than 1/4, maybe 1/3 of the height of the plate that seats to the bottom of the body, so not close to actually opened on that end. ... What are the chances I leaked light to the film? Should I advance a couple frames and keep shooting? I've done this a hand-full of times in my nearly 50-years of using Leica M film cameras (in fact, in every case over the last ~10-years I've been shooting a digital Leica-M). The amount of "damage" will directly correspond to the amount of light there was at the bottom plate when you did the deed. Regardless, I'd advance the film two frames and keep going. The 5 frames exposed are what they are. “When you come to a fork in the road, take it ...” – Yogi Berra Link to comment Share on other sites More sharing options...
stric1975 Posted June 2, 2019 Share Posted June 2, 2019 The same problem happened to me few years ago. I accidentally removed the bottom plate, thinking that the film was rewound. Light leakage was not too bad, but bad enough to damage a few images that were exposed. Most of the film stayed intact. I think there isn't much you can do about exposed film. But you'll find out once developed. The effect can be "interesting". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now