[HPRC 2550WF Hard Case with Cubed Foam Interior] for my gear?

<p>Hello. <br>

Thank you all for my last question, DPP-folder thing.<br>

anyways, I am looking for the right case for my gears, and I am thinking the 2550wf from HPRC.<br>

I like the design, and I think it will fit my usage.<br>

My gears are:<br>

[5D Mark II with vertical grip]<br>

[24-70L]<br>

[70-200 IS II]<br>

[430 II the flash]<br>

Plus usb connector and the charger</p>

<p>Do you think I can fit my all gears in this case?<br>

Case specification says its :</p>

<table border="1">

<tbody>

<tr>

<td >Interior Dimensions</td>

<td >11.22 x 20.08 x 7.83"<em> (28.5 x 51 x 19.9cm)</em> (WxHxD)</td>

</tr>

</tbody>

</table>

<p>And here's the link:<a href="http://www.bhphotovideo.com/c/product/588228-REG/HPRC_HPRC2550WFYELLO_AMRE_2550WF_Hard_Case.html">http://www.bhphotovideo.com/c/product/588228-REG/HPRC_HPRC2550WFYELLO_AMRE_2550WF_Hard_Case.html</a></p>

<p>It should all fit: 24-70L situated vertically, Camera body/grip along one end, 70-200IS II horizontal with the lens hood reversed over the the front of the lens. Flash and extras will have some room to spare. Not sure if you've used the cubed foam before or not, it's great for travel and packing securely-but if you're going to be taking gear in and out of the case frequently-it can become a bit of niggle in the neck. Alos, if you purchase from BH, they might allow you to exchange it if once you have it you realize it's too small. Just don't tear any of the foam apart. (Wait for Henry P. to chime in or call them regarding this).</p>

<p>That's slightly larger than my Pelican 1510. In that case I carry a 5D body with battery grip, 24-105, 17-40, 100-400, 580EXII, several filters (77mm), TC80N3 release, and a bulb blower.<br /><br />I hate the cubed foam, though. I've had the case for a couple years and the foam is falling apart. Probably because I divided the sections too small, leaving only two blocks of foam between each section. Better to get a real solution like <a href="http://www.amazon.com/Pelican-1515-Padded-Divider-1510/dp/B0014D2WGC/ref=pd_bxgy_p_text_c">this</a> with <a href="http://www.amazon.com/Pelican-1519-Organizer-1510-1514/dp/B0014D2WGW/ref=pd_bxgy_p_text_b">this</a>. Those might fit the HPRC but I would check to make sure first since they're made for the Pelican.</p>