Help to identify a part for Mamiya 645 Pro

Discussion in 'Medium Format' started by gerry_miller|1, Oct 4, 2012.

  1. [​IMG][/IMG][​IMG][​IMG]I was changing lenses on my 645 Pro, and this small plastic part was laying on the mirror. It is about 5mm long X 3mm height X 2mm thick. As shown, it has an attaching or adjusting screw on one end. I test fired it a couple of times and the camera still functions. Any help would be appreciated.
  2. Look at this thread I've linked below. I have a picture of the mirror stop adjustment screw which is used to adjust mirror angle and distance to the focus screen. Is yours still there?
  3. Mark,
    Thanks!!! Yes, that's the part. I still have it and I sent it, and the camera, to a repair tech in Portland, OR (about 2 hrs away). I also sent him your pic.
    Thanks again,
  4. is it that Most Breakable Mamiya 645 Pro (TL) part?

Share This Page