Help on re-fitting light meter unit on a Rollei 35 SE

I was stupid enough to detach the metering unit of my Rollei 35 SE

away and now having problem figuring out how to fit it back. Anyone

here have expereince doing it and what position should the plstic

disc (the one that changes the amount of light hitting the CDS cell)

be when engaging it to the gear controlling it.

thx

Does this help any?

http://www.kyphoto.com/classics/forum/messages/674/2904.html?1095957964

Hi Seto,

I have a Rollei 35 SE that does not meter correctly & light readings are off as compared to a hand-held meter (ie. to have comparable readings with the hand-held meter, I have to set the film speed dial to ASA(ISO)100 to meter for a ASA(ISO)400 speed film).

I do suspect that my Rollei might have a problem with the positioning of the plastic disc covering the light metering cell and would like to know if you have succeeded in re-fitting your plastic disc?

I have tried the above link given by Michael but the link does not work.

If possible I would like to have your advice and guide in how to detach the metering unit and adjust the plastic disc to solve my metering inaccuracy. Any help will be greatly appreciated.