H3D-39ms focusing screen repair

Discussion in 'Medium Format' started by brian_hirschfeld, Jun 16, 2010.

  1. Hi,
    I purchased a used H3D-39ms from adorama and it came with a cracked focusing screen (this was because of the way that they shipped it) and they have sent me a new focusing screen, I was wondering if someone could please either send me a link or tell me how to remover the cracked focusing screen currently in the camera, thanks ,
    sincerely, Brian
     
  2. Hi Brian,
    Download the H manual at:
    http://www.hasselbladusa.com/service--support/technical-support/manuals.aspx
    If the focus screen came cracked I'd be extremely worried about the impact on the H that caused it to crack. While it's rock solid, a cracked part would be cause for alarm.
    It's very easy to remove the focus screen; remove the viewfinder, locate the loop type arm on the grip side of the screen and lift out with a pen or small tool.
    Kind regards,
    Derek Jecxz
     
  3. thanks for the help and the concern, I fired up the battery and did some test shots, which turned out fine :) thankfully thanks for the help,
     

Share This Page

1111