ilya_zhavoronkov Posted March 9, 2012 Share Posted March 9, 2012 <p>Hello!<br> I've got Luna-Pro SBC and Luna-Pro f.<br> So, I make measuring, put the arrow on Zero. Everything is OK.<br> But, if I will repeat the measuring the arrow goes out of Zero point.<br> This happens on both SBC and F meters. Also I found this issue on meter of my friend. He's got Profisix.<br> Which measuring is right? The first one or the others?<br> Thank you.</p> Link to comment Share on other sites More sharing options...
q.g._de_bakker Posted March 9, 2012 Share Posted March 9, 2012 If two consecutive readings are not the same, something must have changed.<br>That can be the way you point the meter. Or the light itself.<br>If it was the light, the last reading is always the correct one. If it was the way you hold the meter, it depends. Link to comment Share on other sites More sharing options...
BrianS1664879711 Posted March 9, 2012 Share Posted March 9, 2012 <p>... but how much is the difference: lots or little? Little difference in meter reading generally has little effect on exposure. At some point the difference is negligable... but when that becomes the case depends on a lot of other factors.</p> ... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now