alan_wilder1 Posted April 2, 2011 Share Posted April 2, 2011 <p>I recently picked up a Rollei 35SE and after installing a new silver oxide V27PX battery, the meter lasted only less than a day, before the battery voltage dropped too low for the LEDs to light. I figure maybe 50 to 70 actuations of the meter switch. When fresh, the meter reading is fairly accurate and linear despite it's voltage of 6V instead of a 5.6V mercury cell. Could I have had a bad battery despite buying it new from an online battery supplier for about $4-5 a battery or is the camera's electronics deffective with excessive battery drain?</p> Link to comment Share on other sites More sharing options...
christoph_sensen Posted April 2, 2011 Share Posted April 2, 2011 <p>My 35 SE runs on the same battery for a couple of years now. I'd try another battery from a different batch first. If you see the same happening you need to have the camera checked out.<br> Christoph</p> Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now