Auto bracketing adjustment in 5d II

<p>I am sure this is asked before in the forum, couldn't find it though.</p>

<p>Need to adjust camera for auto bracketing shooting. Don't know if it is possible to adjust for 5 shots but I know 3 possible.</p>

<p>Searched a bit on google but seems confusing to me. Any simple explanation possible ?</p>

<p>And not enough explanation in the manula.</p>

<p>Thank you</p>

<p>No only 3 possible automatically, although nothing is stopping you doing the bracket again with another exposure compensation/bracket combination.</p>

<p>I need to bracket for HDR so can't move the camera !</p>

<p>It's not ideal, but you can try spinning the exposure compensation dial all the way to the left - giving exposures at -2, -4, and 0 stops - then spinning it all the way to the right for +2, 0, and +4. If you're careful, there shouldn't be much movement between the two series. </p>

I don't really understand the problem,

just change the compensation after

one bracketing sequence is done. As

you are on tripod there shouldn't be

any movement.

<p>I adjust the camera for 3 shots to take it at hand but in the end it shoots only one...<br>

And after the shot is done, bracketing sign blinks as it alarms... <br>

Don't know what is wrong.</p>

<p>[[i adjust the camera for 3 shots to take it at hand but in the end it shoots only one...]]</p>

<p>You need to press the shutter button 3 times, or set the drive mode to continuous and hold down the shutter button for the 3 shots. You can also start the 2 second timer and the camera will trigger the shutter 3 times on its own. </p>