Another DIY Project

Here is another Do It Yourself project this time a macro lens.

 

LINK Macro Photography with a $20 3D Printed Microscope Lens | PetaPixel

 

Well, the DIY part is a holder for a microscope eyepiece which is purchased. The handheld images posted are nothing to write home about, but coupled with a sturdy tripod or the DIY stand I posted in a previous message, it might hold some promise.

 

LINK A Stand for Macro Photography | Photo.net Photography Forums

Interesting adapter for 160mm tube length objectives (not for infinity corrected objectives). Could be a nice addition fir macro work in the studio, but might be a challenge doing 4x macro in the field. Probably need a focusing rail or a microscope stage to get a good stack since you can’t change the focus.