6 series minus 4 filters use and fit.

thought id look on ebay for one of these minus lensus mentioned

earlier.. a new series 6 minus 4 poped up for 8 bucks and figured id

better buy it.. hope i can get it on a 49mm diameter rodenstock 135

(focal length) somehow.. any suggestions?? --------------------------

------------------------------------------------------

 

does anyone know what kind of ring i will need to change this from

the 6 series -4 to a 49 mm rodenstock? any other tips? will i be able

to use this at 6-10 feet on a crown graphic with the rodenstock

135?? .. dave.

A 49mm Series VI adapter shouldn't be too hard to locate. They pop up on ebay quite often.

A Series VI adapter for a 49mm lens is a slight step-down to the filter. But, since you're making your 135mm lens a longer focal length by using it, you should just squeak by.

 

In general, I'd use Series VII filters on a 49mm lens.

Dave

That should work great! Another way would be to tape the -4 lens to the lens rear element. A reminder,the arrow must point toward the film plane when the minus lens is used on the rear element. Harry