Jump to content

"2nd Curtain" flash syncronization with Copal-type Shutter


larry_huppert1

Recommended Posts

You can alos do this with the big brother to the popular Pocket Wizard digital radio remote, the Flash Wizard made by LPA. This unit will allow you to set the amount of delay before the sync signal is sent so that you can have the strobe fire at any point (measured in milliseconds during the exposure. Not Cheap, about US$900.00, but there are a lot more features to it.

 

<p>

 

Alternatively a good electronics shop should be able to build you some kind of adjustable delay trigger. For instance if you are shooting a 1/15th second the delay should be on the order of 1/20th second, but you have to figure in triggers signal transmission and triggger signal processing by the flash.

 

<p>

 

If my exposures are 1/2 second or longer I often just trigger by using my hand on a trigger button either on a sync cable,the test button of a small flash (using a slave on the big strobe) or th test button on my Pocket Wizard.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...