<p>Metal lens mount, attached to metal mirror box, attached to metal rear frame used to be usual with higher end Nikons, guessing it's still the...
<p>With a replacement plastic front panel available I would carefully pierce the existing front panel next to the button and operate the lens...
<p>It's an easy job if you manage to avoid touching any circuit boards, wire ends,cap terminals etc.<br> A jolt from a flash cap makes you...
<p>I'd probably try vibrating the release button while using gentle pressure to rotate the lens clockwise.<br> The side of the cutter blades on...
<p>Hi everybody,<br> I'm just reviving this old thread because another member recently emailed me for a copy of the RZ67 repair manual.<br> The...
<p>Hi, no time to read the whole thread, sorry if this has been covered.<br> Have you considered the RB67 Pro SD with the 6x8 electric back? You...
<p>Hi Dan,<br> the middle image of the three appears to have almost no movement blur (hooves, tails etc.) so a faster shutter speed than the other...
<p>Hi Neil, the RB 37mm. lens' filter thread is 0.5mm. pitch. Most filters are 0.5 or 0.75 pitch.<br /> There may be some 40.5 filters with 0.75...
<p>Hi Neil, some filters have a notched locking ring screwed in from the front which is the same thread as the filter, most have a circular wire...
<p>I don't use infrared but my 37mm. came without any filters - annoying to think there must be dozens of ex-owners of these lenses with filter...
<p>Check that the meter coupling ring is moving freely, check that the exposure lock lever is operating correctly, check that the diaphragm in...
<p>I've often found the cause of this and many other faults to be corrosion due to liquid ingress.<br> Don't know the f100 but do (or rather, did)...
<p><cite>www.rollei<strong>repair</strong>s.com/models.htm</cite><br> <cite>www.cameraweb.com/manuals.htm</cite><br>...
<p>Just looked at the CRD87 (previous post). It seems to be very well made and might do the job but I would ask the manufacturer first. If the...
<p>I don't know of anything "out of the box" which will fit the bill.<br> Did it work with your Nikon lens without damage to the tripod mount?...
<p>It's not possible to be certain from a photo but it could be separation. The small indentation in the "stain" at 10 o'clock in picture 2 is...
<p>Apologies for the misinformation in my previous response. Thought I remembered the ETRS had electronic release - wish I could remember not to...
<p>I remember the ETRS much less well than other MF cameras but if you're sure you've missed nothing the first thing you could try is a fresh...
<p>Haven't been able to access your jpg at tinypic.com by c/p or search.</p> <p> </p>
<p>http://www.mediafire.com/?sharekey=41b0c629a8bae47e6b21be4093fab7acd423d92f97835b639d4bfef7ef5beeff<br> The repair manual for the RZ can be...
Separate names with a comma.