<p>I seek comments on what is optimum printer resolution setting: Lightroom suggests 240 DPI but I wonder if better results would be achieved...
<p>My apologies to all and esp to Phottix. I have now found that the Odin does in fact provide manual control of the 580EXII and 430EXII...
<p>Hello<br> I just purchased an Phottix Odin/2 receiver kit today for my Canon 5D2 MkII. The system works as expected with the speedlights...
<p>FINDINGS B - IR FILTERING OF 580 EX II<br> I entirely covered the flash tube area of the 580 EX II (ie the clear plastic window) with a Lee...
<p>Mr Rodeo:<br> What happens is subject is other than 18% gray?<br> What is the subject is a shiny plastic thing with reflective surfaces?<br>...
<p><strong>FINDINGS A ST-E2</strong><br> #1 I obtained an ST-E2 and triggered it aimed at the L358 ligthmeter with NO 430 flashes engaged. The...
<p>Of course (I expect) all of this is solved by radio triggering - next time I'd just buy the Canon STE-RT-E3 instead of the STE-2 and the...
<p>I am going to conduct two experiments on this:<br> 1) I have ordered a piece of IR filter material from Lee and am going to try surpessing the...
<p>re Suppressing the 580 Pre-Flash:<br> Just found this re IR vs. visible light pre-flash communication of Canon Speedlights:<br> From...
<p>Additional Comments / Questions:<br> 1) Can anyone confirm if EOS Speedlights do their Master-Slave communication by infrared vs visible...
<p>Hello all<br> I want to use a Sekonic L-358 light meter to measure the exposure settings for a three light setup comprised of: Three Canon...
<p>Hello All:<br> In the workflow I describe (Camera CR2 > DxO DNG > LR3) , I think DxO becomes in effect the camera and the DNG file that...
<p>Francisco<br> I think you're on to something here and I want to understand it. Are you saying that way to preserve ProPhoto colour space when...
<p>Hello Again,<br> This discussion has evolved somewhat above my knowedge level, but based on Francisco's argument it would seem that in fact the...
<p>Just for clarity here :<br> I beleive the both my monitor (NEC PA241) and my printer (Epson 3880) have sufficent spectral response to cover the...
<p>Thanks to all above; a few comments for further discussion:<br> Francisco:<br> Does your comment about DXO outputting in ARGB hold even when...
<p>Hello All<br> My workflow is : Convert RAW to TIFF in DXo then use LR3 to fine tune / crop / print. Print output is generally to an Epson...
<p>I use Canon 5D MkII with 580 EX II and 430 EX II speedlights. Over the last year or so I have been delving into artificial lighting and am...
<p>After all of this and much experimentation, I have concluded that the root cuase of this problem was that some of Sony 2500 mAH NIiMH batteries...
<p>Thanks all, some additional info:<br> I am using Sony 2500 mAH NIiMH batteries. I have tried all the obvious like swithching different...
Separate names with a comma.
