Olympus Power Bounce Grip 2 for OM System

Hi;

I was wondering if anyone knew what TTL Auto cord I am supposed to

use with the Olympus Power Bounce Grip 2 for Off Camera Photography?

 

I use an Olympus OM88 and I need to know which cord to try and get

that connects directly into the Power Bounce Grip 2 and my Camera. My

camera needs the Hot Shoe Boot on one end of the cord and the female

prong connector on the other end which connects to the Bounce Grip so

I can take advantage of the flash charger on the bounce Grip. Does

this make sense? If anyone can help me I would greatly appreciate it.<div></div>

Hi David - I just answered your question over in the <a href="/bboard/q-and-a-fetch-msg?msg_id=005u4t"><b>other forum</b></a>, but noticed you are also in here! and cool - I didn't realise we were getting an Olympus Forum. Excellent!

If you need to connect to the hotshoe on your OM88, you'll need to get the Olympus TTL Auto-Shoe Cord T 0.6m, unless the OM88 has the TTL five pin connector - not familiar enough with the OM88 to be sure of that.

 

I use the Power Grip 2 with the T-32 flash on my OM-2 and it's a nice setup - the grip gives plenty of extra life to the flash unit. Enjoy.