How does one spot RC paper?

I am having a terrible time spotting my RC prints. I am using a 4x5 camera and the quality is quite good. However, my spotting ink just seems to sit on the surface of the print. I tried "Spottone" as well as spotting pins from Photo Impressions. Same problem. The spotting ink stands out like a sore thumb. Help! I have some beautiful prints that I am ruining because I can't get the spotting figured out.

Use distilled water when mixing the spotone. You have to get the

colour just right or it will be noticeable. You may have to mix

different colours of spotone. What type of RC paper are you using,

and what kind of paper surface is it? Glossy prints are not easy to

retouch.

 

<p>

 

Try a laquer spray over the retouched work if you are using a glossy

surface.

 

<p>

 

If all else fails, use fibre-based paper. It retouches well. The

trouble with retouching RC prints is that the retouching inks remain

on the surface. Build up your retouched area with several

applications. In some areas, like clear skies, it is hard to keep a

retouched area from showing. You might also try dusting off the

negative and reprinting. It may take less time than trying to retouch

a badly spotted print.

In addition to what George said, make sure the tone of your spotting

fluid is a close match to your print color. If you've got cool tone

prints and a slightly warm spotting fluid, the difference in color

will make it stand out a lot more. I guess most people use Spotone

#3, but for my prints I've found that Spotone #2 better matches my

print tones.

You've got to match the color as the others have said. Let it dry to

be sure it matches.

 

<p>

 

Moisten the surface of the paper so that it will take the dye, and so

the dye won't run over the surface of the paper.

 

<p>

 

Dilute the dye and stipple it in with a very fine brush (I use 0, 00,

and 000) slowly. When you've matched it, STOP. One drop too much,

and you'll need to do it over.

"By da strange stains that appear on it? Hah! - Dat is if it's at

least a couple years ol'. Right?" :>)

I'm a bit suprised that some one using a 4x5 camera for B&W is not

using FB paper. Here is a tip, if you over do spotting, use a small

brush with plain water and you can work the spotone out to get a

better match. Also you can rewash the print and the spotone will wash

out, so you can start all over. Better to spot a print before

mounting. Spotting just takes practice.

It is also important to have a white tissue in one hand to blot your

brush before applying the Spotone. You should be applying the Spotone

to the print nearly dry with a very fine pointed sable brush - if

there is too much moisture, you're right, it just beads up. The pearl

surface RC paper takes spotting fairly well if you use the blotter.

Jerry, I use a set of "Spotpens" from Tetenal. They work well on

Ilford Multigrade RC Pearl, in that they don't leave much (if any)

trace of the fluid. They are very finely pointed and work best by

applying them in a stippling manner and by building up a tone match

using a lighter colour. Gloss paper is difficult to spot whatever the

support. As for the posting suggesting that 5x4 users should be using

fibre paper...why? When my prints are behind glass I challenge anyone

to pick out the fibre or RC print, I know I can't!! Modern Rc is

quick to use, dries quickly and FLAT, is easy to mount and the matt

surfaces give a quality that is easily a match for fibre. As for the

question of longevity and permanence. Granted, the experts reckon

fibre prints will last a lifetime and longer AS LONG AS THEY ARE

PROCESSED CORRECTLY. RC hasn't been around long enough for any

credible testing but IMHO as long as it is processed correctly,

washed and toned in either selenium or gold, I reckon it will outlast

me!

Paul, your contributions will be missed, since you don't expect to

live long.

 

<p>

 

For results of "credible testing" of RC paper, see Ctein's "Post

Exposure."

"Everybody's got to get into the act" - Jimmy Durante

Here's my 2 cents.

Use a 000 sable brush and cut off, at the base, half of the hairs

around the outside edge. This will leave you an extremely fine point.

As stated above (and I agree wil most of what was suggested) stipple,

not paint, in tiny random pin point dots the area. Start much fainter

than you want and build up as necessary. If you can see the

imperfection at 4-5 feet viewing distance, add more. If you can't see

the spot at that distance, don't worry.

As we used to say in the military, "Don't sweat the small stuff".

(Explitive altered).

Jerry:

 

<p>

 

One small thing that can make a huge differenc here is to make sure

you do not use a hardening fixer.

Sal, Maybe I got a little carried away! It's just that there seems to

be a lot of snobbery surrounding Fibre paper...if you use RC then you

cannot be treated as a "proper" photographer! This attitude gets my

back up. So what if fibre papers will last for eternity....not much

use if the image is poor in the first place. Using fibre paper

doesn't "make" you a LF photographer. I use both, despite having

initial drying problems (that were sorted following advice on this

forum). There is something "tactile" about fibre, but I still find I

get similar visual quality from RC paper. Each type has its uses and

as yet I've never had a customer ask what type of paper the image is

printed on, they buy them 'cos they like them!! But modern RC is here

to stay and will continue to improve. There I feel better now!!!

Regards Paul

Jerry,

As people have mentioned, the key is to:

1. Use a small quality brush 2. Make sure you build up the color.

Place a spot of diluted spot tone into the the area(being careful not

to let it bleed outside of this area) and let it dry. When its dry

and more is needed, place another spot onto the area again. For dark

areas you will have to apply the spot tone several times. After a few

trials, you should get it. Something that helps me is to do a test

before each application on a practice print to see how dark the spot

tone will dry.

"How does one spot RC paper?" - Easy. It says 'RC' on the box.<br>OK

joke over.<br>My favoured technique for spotting is to use the finest

point technical drawing pen (e.g. 0.1mm Rotring) filled with Indian

Ink. Using such a pen you can stipple extremely tiny dots onto the

paper, emulating the grain texture. There's no meesing about with

brushes and different shades of ink, and with a bit of practise, the

end result becomes pretty much invisible, even in a strong sidelight.