Jump to content

Electronic flash for Minox LX/C/B


john_sonewald

Recommended Posts

My understanding is that on an LX, the official Minox flash is

automatic assuming your camera is set on automatic. The flash

physically is very small, yet has a decent GN. I use a small

autostrobe from Promaster at less than $50. It works with hotshoe or

synch cord and is not elegant, but very effective. Martin Tai may

have a tip or 2 for you!

Link to comment
Share on other sites

The official 8x11 Minox flash is not automatic when in use with the

TLX or LX. The shutter speed has to be set at 1/125 (GN12). When

using ISO100 film, my tests showed that the subject has to be at a

distance of 3.4 to 4M, Best is 3.5M. With the ND filter, distance can

be decreased to 1.7 to 2M. The Auto Mode on the TLX is designed for

flash cubes. If you folllow the flash manual, you will either get

over exposure, or under exposure (heavy grains).However I think the

color temp of the flash is too cold.

To use the automode, try using the Hotshoe adapter, and the Minox FC-

X or FC-S flash, set it to F4 (ISO100). The result is very good color

temp is a little bit warmer, and the subject is more lifelike. You

can set the TLX or LX to automode.A PC code can be used to connect to

other flash on a tripod.

The MINOX FC-X or FC-S flash are available seperately.

Read the Flash section in this FAQ. I wrote something there about

using the FC-X flash. You can also see some of the result in my

personal gallery.(Also pictures using SB-28 Flash on Tripod).

 

<p>

 

The ECX flash can be used for the TLX using the MInox adapter. But I

suggest to use the 6X11 TLX flash for the ECX because it is flatter.

I have both ECX and TLX setup.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...