matthew__ Posted January 21, 1999 Share Posted January 21, 1999 I have a Minox B with chain bought used. Recently when I took close up pictureI found that the picture was not sharp. Later I found out that my the nodes on my chain is not accurate, for example, its one foot mark is about 13 inches. Link to comment Share on other sites More sharing options...
martin__5 Posted January 21, 1999 Share Posted January 21, 1999 I check my Minox chain, it is quite all right. I suspect your chain may have been misused, such as pull the chain to get it out of pocket, drop it to disentangle twisted chain etc. You may get a heat shrinkeable tube from Radio Shack, cut out small 2-3 mm size tube and shrink wrap at exact 12" spot to replace the enlongated node. There are many Minoxers carry their Minox with a shoe string on their neck and keep the chain at home. I like to use the chain, as it is neat for macro pictures. Link to comment Share on other sites More sharing options...
daniel__ Posted January 22, 1999 Share Posted January 22, 1999 Do you have the right chain ? <p> There is two versions, in feet and in meters, depending of the camera version. Link to comment Share on other sites More sharing options...
jim3 Posted November 10, 1999 Share Posted November 10, 1999 I think the secret is to move the bead of the chain into the middle of the camera view when you look thru the viewfinder. You are sweeping an arc with the chain. I thought my chain had stretched, but the beads match up if you swing the handheld bead into the center of your subject being viewed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now