grunzweig photography Posted March 4, 2001 Share Posted March 4, 2001 I have a Unicolor drum which is leaking pretty badly. I checked the gasket seal and the rubber under the seal and they look fine. Does anyone have any ideas on how to correct these leaks? <p> Thank, Ken Link to comment Share on other sites More sharing options...
james___ Posted March 4, 2001 Share Posted March 4, 2001 The plastic dogs(the little plastic ears that latch the lid to the drum) get worn and start allowing the drum to leak. Get a thin sheet of poly eurathane and cut a spacer and place between the gasket and lip of the drum. It makes the gasket a little thicker and seals it right up like new. james Link to comment Share on other sites More sharing options...
david_grandy1 Posted March 4, 2001 Share Posted March 4, 2001 Mine leaked badly too, yet the the gasket appeared to be perfect; and the drum and lid were pristine. But when I replaced gasket with a new one that a friend had laying around, the leaks stopped. <p> Does anyone know if you can buy replacement gaskets commercially? Link to comment Share on other sites More sharing options...
harleyman7 Posted March 4, 2001 Share Posted March 4, 2001 Try holding it with pliers over a hot stove eye a few seconds at a time. I had one to leak and kept heating it and trying it till the leak was fixed. Link to comment Share on other sites More sharing options...
pat_kearns1 Posted March 4, 2001 Share Posted March 4, 2001 David, I have seen gaskets for sale on ebay with a starting bid of $10 periodically. Look in the darkroom section of photo items. Link to comment Share on other sites More sharing options...
grunzweig photography Posted March 6, 2001 Author Share Posted March 6, 2001 Thank you all for your help. I have inserted a second plastic washer and it seems to have stopped the leak. <p> Best regards, <p> Ken Link to comment Share on other sites More sharing options...
irwin_cua Posted April 16, 2001 Share Posted April 16, 2001 I also have a leaking unicolor 8x10 drum. Where do you place the plastic? Between the lip of the drum and the gasket of the cover? <p> Irwin Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now