don_canning2 Posted August 20, 2001 Share Posted August 20, 2001 Has anyone developed the new Delta 400 in PMK and if so, what are time and temperature that proved successful? Thanks Link to comment Share on other sites More sharing options...
davidrwilliams Posted August 20, 2001 Share Posted August 20, 2001 Don: I've been developing new Delta 400 (120 format) in regular strength PMK in a Paterson System 4 tank for 16 minutes at 70F - gives me EI 320 that prints well using my dichroic (diffusion) enlarger on Ilford Multigrade at grade 2. <p> I agitate using end-over-end inversions with continuous agitation for the first 30 seconds followed by 2 inversions every 15 seconds. I use a water stop bath for 1 minute, Formulary TF-4 fixer, 2 minute after-bath in the used developer, and a 20 minute wash. <p> Great combination with plenty of stain, great sharpness, and grain that comes close to rivalling that of FP4+/PMK. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now